start switch give a good growl but motor not starting - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

start switch give a good growl but motor not starting Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DBXR453ET5WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

jonkertb		#1 Posted : Monday, September 14, 2009 7:29:50 AM(UTC)
Rank: Member Groups: Registered Joined: 9/14/2009(UTC) Posts: 2		When I rotate the start knob, I get "the Growl" by the switch but no motor start. Rotated drum by hand...no change where do I start? thanks tom....tools and multimeter in hand!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Frank / APP Team		#2 Posted : Monday, September 14, 2009 11:34:18 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: jonkertb When I rotate the start knob, I get "the Growl" by the switch but no motor start. Rotated drum by hand...no change where do I start? thanks tom....tools and multimeter in hand! Disconnect the belt from the motor and make sure the motor spins freely. Maybe something stuck in the blower? If you have someone to help you, give the motor a spin when they hit the start switch. If the motor is free and it won't hand start, sounds like you need a new motor. Part number: AP2043550 Model DBXR453ET5WW


User Profile View All Posts by User View Thanks

jonkertb		#3 Posted : Monday, September 14, 2009 3:33:17 PM(UTC)
Rank: Member Groups: Registered Joined: 9/14/2009(UTC) Posts: 2		well, momma is happy and so am I .....no cost fix....this time..... It was the centrifugal start switch that wasn't resetting due to lint build up on the mechanical part of the start switch....cleaned off the linkage, blew it out and away it went.......however that being a set of contacts with pretty good amperage I imagine many "bad" motors are really a set of pitted contacts. thus a follow up question for the parts folks. can those start switches that are on the back of the motor be gotten separate from the motor? thanks tom


User Profile View All Posts by User View Thanks

applianceman		#4 Posted : Tuesday, September 15, 2009 8:11:01 AM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		No you can’t replace the start switch. However I have repaired many dryers the way you described (cleaning contacts) I think you are ok. If the dryer does the same thing again soon I would recommend changing the motor. Clothes Dryer Repair Guide


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close