Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
IKEA by Whirlpool 42" Range hood lights out
Options
Go to last post Go to first unread
Model: IH8432R3 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
liquidoranges  
#1 Posted : Tuesday, July 28, 2009 12:50:45 PM(UTC)
liquidoranges

Rank: Member

Groups: Registered
Joined: 7/28/2009(UTC)
Posts: 5
The four halogen lights all went out at the same instant. Fan continues to work. light switch relay is heard activating, but no lights.

Any ideas???
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
liquidoranges  
#2 Posted : Friday, August 14, 2009 9:30:21 AM(UTC)
liquidoranges

Rank: Member

Groups: Registered
Joined: 7/28/2009(UTC)
Posts: 5
All four lights went off simultaneously. Wiring diagram indicates TWO transformers. is it likely these both failed at the same time, or is it a switch on the circuit board? pushing the light switch makes a relay on the board click as normal, but no lights.

I sure could use some advise, including how with my volt meter I could possibly test to determine which part is bad.
Back to top
Gene  
#3 Posted : Friday, August 14, 2009 5:33:54 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Check for 120 VAC to each transformer primary windings from the control board. If there is nothing wrong then check for 12 VAC from each transformer secondary windings. Post the results.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL IH8432RS1 | AppliancePartsPros.com

Gene.
Back to top
liquidoranges  
#4 Posted : Monday, August 17, 2009 6:52:27 AM(UTC)
liquidoranges

Rank: Member

Groups: Registered
Joined: 7/28/2009(UTC)
Posts: 5
Originally Posted by: Gene Go to Quoted Post
Check for 120 VAC to each transformer primary windings from the control board. If there is nothing wrong then check for 12 VAC from each transformer secondary windings. Post the results.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL IH8432RS1 | AppliancePartsPros.com

Gene.

Per the wiring diagram, I located the power from the control board (P14 & P15). The two transformers are fed from this single point of contact. Voltage is present. Power is going to the transformers. From the step-down side (12v) there is nothing. This would suggest both transformers failed simultaneously? The light switch relay on the board gets very hot (just for info)
Back to top
Gene  
#5 Posted : Monday, August 17, 2009 10:49:05 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Have you disconnected the light wires from the transformers before measuring low voltage?

Gene.
Back to top
liquidoranges  
#6 Posted : Monday, August 17, 2009 10:53:14 AM(UTC)
liquidoranges

Rank: Member

Groups: Registered
Joined: 7/28/2009(UTC)
Posts: 5
yes, single plug between transformers and lights: one transformer for each two lights. tested voltage with switch on, probing contacts at plug.
Back to top
Gene  
#7 Posted : Monday, August 17, 2009 5:47:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Looks like both transformers have gone bad.

- The transformer Part number: AP3846624
Part number: AP3846624


Gene.
Back to top
liquidoranges  
#8 Posted : Wednesday, August 19, 2009 5:16:55 AM(UTC)
liquidoranges

Rank: Member

Groups: Registered
Joined: 7/28/2009(UTC)
Posts: 5
thanks very much for your help!
Back to top
Gene  
#9 Posted : Wednesday, August 19, 2009 10:59:12 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET