Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Fh Code No Or Insufficient Water Supply
Options
Go to last post Go to first unread
Model: GHWG150PW0 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
meeksj  
#1 Posted : Saturday, June 20, 2009 9:01:06 PM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
I Checked And The Faucets Are On, Checked The Inlet Screens, Hoses Are Not Kinked, And Water Hoses Are Not Frozen. What Could Be The Problem?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, June 21, 2009 3:35:29 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Could find no info on the given Model Number.
Could it be that it is a GHW9150PW0
THIS FORUM IS DEAD!!!!!!!
Back to top
meeksj  
#3 Posted : Sunday, June 21, 2009 10:15:17 AM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
Thank You ,yes It Is Ghw9150pw0
Back to top
meeksj  
#4 Posted : Sunday, June 21, 2009 6:28:43 PM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
Originally Posted by: denman Go to Quoted Post
Could find no info on the given Model Number.
Could it be that it is a GHW9150PW0



YES IT IS GHW9150WP
Back to top
denman  
#5 Posted : Monday, June 22, 2009 3:27:47 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for WHIRLPOOL GHW9150PW0 | AppliancePartsPros.com

Here is a tech sheet
https://www.servicematters.com/d...0Sheet%20-%208182277.pdf

Here is a service manual for a 9100, I believe the 9150 is fairly close to this unit so hopefully it will help
https://secured.whirlpoo...ILE/Duet%20Job%20Aid.pdf

I am assuming that when you checked you water supply you ran the hoses into a pail to be sure they were OK. The reason is that hoses can collapse internally usually though you see a bulge on them, also many new homes have a hose burst system which can cause problems.

Try hot only and cold only to see if one of theses will work.
The tech sheet should help you narrow it down.
THIS FORUM IS DEAD!!!!!!!
Back to top
meeksj  
#6 Posted : Monday, June 22, 2009 7:35:17 AM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
Originally Posted by: denman Go to Quoted Post
Here are your parts
Replacement parts for WHIRLPOOL GHW9150PW0 | AppliancePartsPros.com

Here is a tech sheet
https://www.servicematters.com/d...0Sheet%20-%208182277.pdf

Here is a service manual for a 9100, I believe the 9150 is fairly close to this unit so hopefully it will help
https://secured.whirlpoo...ILE/Duet%20Job%20Aid.pdf

I am assuming that when you checked you water supply you ran the hoses into a pail to be sure they were OK. The reason is that hoses can collapse internally usually though you see a bulge on them, also many new homes have a hose burst system which can cause problems.

Try hot only and cold only to see if one of theses will work.
The tech sheet should help you narrow it down.



Thank you so much, I will check the hoses better, and check out the teck sheet. THANK YOU AGAIN.:)
Back to top
meeksj  
#7 Posted : Tuesday, June 23, 2009 7:08:19 PM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
Originally Posted by: meeksj Go to Quoted Post
Thank you so much, I will check the hoses better, and check out the teck sheet. THANK YOU AGAIN.:)



It's not that my washer isn't geting enough water, its getting to much water then it beeps and flashes FH then it stops and drains all the water out. Is there a part that lets the washer know when to shut the water off. I even push pause button and then push the start button again and it dose the same thing over again.
Back to top
denman  
#8 Posted : Wednesday, June 24, 2009 7:40:59 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sounds like either the water level switch or the flow meter
THIS FORUM IS DEAD!!!!!!!
Back to top
meeksj  
#9 Posted : Wednesday, June 24, 2009 2:14:37 PM(UTC)
meeksj

Rank: Member

Groups: Registered
Joined: 6/20/2009(UTC)
Posts: 6
Originally Posted by: denman Go to Quoted Post
Sounds like either the water level switch or the flow meter



THANK YOU SO MUCH.
Back to top
frostywashdry  
#10 Posted : Wednesday, June 24, 2009 3:14:18 PM(UTC)
frostywashdry

Rank: Member

Groups: Registered
Joined: 4/14/2009(UTC)
Posts: 45
Originally Posted by: denman Go to Quoted Post
Sounds like either the water level switch or the flow meter


Agreed :):)
Back to top
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET