Rank: Member
Groups: Registered
Joined: 7/3/2008(UTC)
Posts: 1
|
I replaced a burnt out light bulb with the microwave (GE JVM1650) plugged in and as a result lost function of the bottom range lights. I ordered a replacement smart board RAOTR7T-01 (WB27X10382)and installed it. Now the bottom lights work but the microwave interior vent and lights come on when the door is closed and the microwave won't heat....please help. I don't want to be stuck with a 100 dollar useless part and a microwave that doesn't function.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
|
Check the upper door switch, you may have bumped it during the repair. Remove the control panel and look at the switch bracket. There are 3 switches, top middle bottom. Make sure the door latch is pushing the button on the switch.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/30/2009(UTC)
Posts: 1
|
Ive got the same problem and cant get A schematic from Ge Im not sure of the position of the switches on the door N/O or N/C?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
