Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Having trouble getting to chopper
Options
Go to last post Go to first unread
Model: DU1050XTPSO Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
bcullen  
#1 Posted : Monday, November 16, 2009 11:32:07 AM(UTC)
bcullen

Rank: Member

Groups: Registered
Joined: 11/16/2009(UTC)
Posts: 3
My upper spray arm is not rotating and thanks to what I've learned from this sight it's most likely a clog somewhere. I want to get to the chopper to see if it's full of stuff but I'm having difficulty prying open the protective cover. I actually broke the tab!! If that's not the culprit the next area to look at is the inlet hose.

1. Does anyone have any tips as to how I get this sucker open?
2. Am I on the right track with my thinking?

Thanks in advance,
BC
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Monday, November 16, 2009 2:05:48 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You can find some useful information in one of our previous posts: http://forum.appliancepartspros...rlpool-dishwasher-2.html

Gene.
Back to top
denman  
#3 Posted : Tuesday, November 17, 2009 6:36:14 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
THIS FORUM IS DEAD!!!!!!!
Back to top
bcullen  
#4 Posted : Tuesday, November 17, 2009 7:03:03 AM(UTC)
bcullen

Rank: Member

Groups: Registered
Joined: 11/16/2009(UTC)
Posts: 3
Thanks for the tech sheets...I finally got the protective cover off only to find that the blade has completely sheered off the chopper assembly. It was lodged underneath. I went ahead and cleaned the screen and now need to order a new chopper and check valve. How does the screen come out? I see two notches in the screen which line up with the housing but it doesn't want to come out and when I try to push in on the spring I get nothing. Any ideas?

BC
Back to top
bcullen  
#5 Posted : Tuesday, November 17, 2009 7:08:26 AM(UTC)
bcullen

Rank: Member

Groups: Registered
Joined: 11/16/2009(UTC)
Posts: 3
Gene,

Thanks so much for the useful information. I was able to finally get it to pop off. Now I'm faced with a chopper blade that completely sheered off from the assembly.I'm off to order a new chopper and check valve. How does this one come out? I tried lining up the notches in the screen with the housing and lifting and got nowhere...ditto when I tried to push on the spring behind the screen. Please advise.

BC
Back to top
Gene  
#6 Posted : Tuesday, November 17, 2009 10:21:43 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You can find the instructions in the tech sheet provided by denman. A small pliers might help.

Gene.
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET