Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Guest  
#1 Posted : Tuesday, July 2, 2024 9:31:47 AM(UTC)
Guest

Rank: Guest

Groups: Guests
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
See above. About a week ago, the dryer stayed on for a very long time and would not shut off. When I opened the door, the clothes were extremely hot, and the dial on the timer was "stuck" in the same position. A few days later, my son opened the door to check on his clothes and found the left vent glowing red. He turned the dial off, and the glow went away. Today, I opened the door, turned the dial to a setting other than Off, and the vent began glowing again. I could also hear a humming noise before turning it off. I think I have timer issues, and due to the length of time the dryer was on a week ago, it affected the heating element and became damaged (grounded). Can someone confirm that this may be the issue?

Edited by user Tuesday, July 2, 2024 9:33:31 AM(UTC)  | Reason: misspelled word.

Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
applianceaid1  
#2 Posted : Tuesday, July 2, 2024 11:06:25 AM(UTC)
applianceaid1

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/12/2024(UTC)
Posts: 0
Canada
Location: Ontario

Was thanked: 10 time(s) in 10 post(s)
Hi,

Sounds like the heating element is shorted to ground = new heating element time.

LINK> Heating Element Assembly.

jeff sr.
Appliance Repair Aid
https://www.applianceaid.com/
thanks 1 user thanked applianceaid1 for this useful post.
ppjemartello on 7/2/2024(UTC)
WilliamM/APP Team  
#3 Posted : Tuesday, July 2, 2024 12:03:35 PM(UTC)
WilliamM/APP Team

Rank: Member

Groups: Moderators, APP Team, Registered
Joined: 2/27/2024(UTC)
Posts: 0
United States
Location: TN

Was thanked: 14 time(s) in 14 post(s)
Based on the element glowing when the timer is set to anything but the off position, the heating element is certainly grounded out. This can be verified by unplugging the power cord, accessing the element and disconnecting the two wires, and testing from the element terminals to the frame for continuity. If there is continuity, the element would need to be replaced. https://www.appliancepar...ng-279838-ap3094254.html
thanks 1 user thanked WilliamM/APP Team for this useful post.
ppjemartello on 7/2/2024(UTC)
ppjemartello  
#4 Posted : Tuesday, July 2, 2024 12:40:26 PM(UTC)
ppjemartello

Rank: Member

Groups: Registered
Joined: 7/2/2024(UTC)
Posts: 0
United States
Location: Virginia

Thanks: 2 times
Thanks for the feedback!!!
applianceaid1  
#5 Posted : Tuesday, July 2, 2024 1:08:10 PM(UTC)
applianceaid1

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/12/2024(UTC)
Posts: 0
Canada
Location: Ontario

Was thanked: 10 time(s) in 10 post(s)
If you get a chance, let us know how the repair went.

jeff sr.
Appliance Repair Aid
https://www.applianceaid.com/
ppjemartello  
#6 Posted : Wednesday, July 3, 2024 6:41:15 AM(UTC)
ppjemartello

Rank: Member

Groups: Registered
Joined: 7/2/2024(UTC)
Posts: 0
United States
Location: Virginia

Thanks: 2 times
Will do!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.