washer initially wouldn't spin at all and seemed to be stuck above the transmission Transmission spins freely either way but once I install the tranny it wouldn't turn. I changed the spin basket drive thinking the basket drive shaft might have been bent which seemed to help but clutch was sipping so I replaced the clutch with a new one as well. Now it spins but very weakly. I can stop it with my hands easily . The new clutch is slipping even though the clutch band is new and very hard to rotated inside the clutch plate which to me indicates a good clutch band . I don't know what to look at next. is it possible there is a dented or misaligned or bent part. I even tried another tranny but no improvement in the problem.