Fisher Paykel been overflowing now code 130 and stuck - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Fisher Paykel been overflowing now code 130 and stuck - Model WA42T26GW1 fault 130 after over flowing Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

Gilligan8		#1 Posted : Monday, May 27, 2019 8:45:57 PM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2019(UTC) Posts: 0		I've had this baby for almost 10 years and it's been a workhorse. I'm not really ready to give up on her yet. I've had her apart a few times for bobby pins in the diverter and pump but this has last one has had me stumped. Recently she's been overflowing... we set the level to mid/high vs auto and it "helped". I assumed the pressure tubes had issues but couldn't find much info and we were limping along... why fix it right? LOL Tonight put on a load and came into water EVERYWHERE and she was beeping. Put it in diagnostics mode and drained it. Looked at fault code and it was 130. Which googling tells me odd signal to the rotor. I'm betting it got wet while water was pouring out. Does this seem right? Let her sit overnight and she might be alright? If not, what do you guys think it is?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gilligan8		#2 Posted : Tuesday, May 28, 2019 5:16:43 AM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2019(UTC) Posts: 0		So this morning she starts, so I guess the RPS had gotten too wet? Now how can I fix my overflow issue? I rinsed my clothes last night by filling the tub with more water and draining it. While doing so I turned on the fill level diagnostics and though it seemed to continuously monitor it properly, it was overflowing before the level got to the top of the indicator. I had gotten to the 10101111 indicator, or something close to that, so it still thought it had more to go. This was after stirring clothes around to remove air as much as I could.


User Profile View All Posts by User View Thanks

Gilligan8		#3 Posted : Tuesday, May 28, 2019 8:04:35 PM(UTC)
Rank: Member Groups: Registered Joined: 5/27/2019(UTC) Posts: 0		Ran it "dry" today on "low" water level setting. After first recirculate cycle it filled it back up to the medium level. Is this right?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close