Finding replacement magnetic ring for a KitchenAid mixer RPM sensor - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Finding replacement magnetic ring for a KitchenAid mixer RPM sensor Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KFP0933	Brand: Kitchen Aid	Age: Less than 1 year
Previous Topic Next Topic

raindogmx		#1 Posted : Saturday, June 10, 2017 11:44:35 AM(UTC)
Rank: Member Groups: Registered Joined: 6/10/2017(UTC) Posts: 2		I have a KFP0933 KitchenAid mixer which uses this motor: picture PN W10467162. At the rear end of the motor shaft there is a sensor which I assume is for RPMs: picture There was a magnetic ring around the shaft, which I broke: picture And that's my story. I need to replace it because now the mixer does not work properly. I took some rough measurements and the ring seems to be 15 mm in diameter, 8 mm inner diameter with a 3.5 mm thickness and 5 mm height: diagram I don't even know how to search for it. I've been looking for ferrite toroids but can't find any with the same measurements. I also don't know anything about the material. Please and thank you


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

barkster		#2 Posted : Monday, September 18, 2017 10:42:07 AM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2014(UTC) Posts: 4		did you ever find this piece or specs? I thought about 3d printing one but I need to know how many magnetic spots are on the ring. I assume only 1.


User Profile View All Posts by User View Thanks

raindogmx		#3 Posted : Monday, September 18, 2017 11:29:26 AM(UTC)
Rank: Member Groups: Registered Joined: 6/10/2017(UTC) Posts: 2		Originally Posted by: barkster did you ever find this piece or specs? I thought about 3d printing one but I need to know how many magnetic spots are on the ring. I assume only 1. No, I ended up taking it to a service center where they first said they would need to replace the whole assembly but in the end just fixed it with a piece but they didn't give me any details and I haven't opened it to see what they did. Maybe I will.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close