Rank: Member
Groups: Registered
Joined: 3/5/2017(UTC)
Posts: 1
|
We bought and had our GE Profile Microwave, model #PEM31SM4SS, installed in May of 2013. Today, I discovered that the microwave was dead.
I checked all the fuses, they were all fine.
I checked all the GFI outlets, they were all fine.
So I removed the microwave and plugged it in into a different outlet and it was still dead. Just to be sure, I plugged something else into the outlet where the microwave had been and it works. Clearly, the microwave is dead. After less than for years. Any idea/thoughts would be extremely welcome.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395  Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
When you said you checked the fuses, are you talking about the one inside the microwave (MW) ?
I usually start by checking the cord all the way into the microwave.
Then I check the power connector and fuse. If they all test good, I check for power at the main circuit board.
If I have power up to it, but the MW is still dead, you know its in the board.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
