GE Profile does not spin or agitate - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

GE Profile does not spin or agitate Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WPSB8060B0WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

mailachefski		#1 Posted : Tuesday, August 16, 2016 7:43:44 PM(UTC)
Rank: Member Groups: Registered Joined: 2/25/2011(UTC) Posts: 6		Just today my washer has stopped agitating and spinning in all cycles. It will fill and drain. I have checked the motor and control panel for fuses, and see none... I do not hear any noise coming from the motor. The basket and agitator do not spin by hand. I made sure all the connections were seated properly to the best of my knowledge. I do not see any visual signs of leaking or electrical malfunction. How should i proceed in trouble shooting?:confused:


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Wednesday, August 17, 2016 10:59:59 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		There is an inline fuse in the wire harness as it goes down toward the motor assembly. If you take off the front panel exposing the tub motor etc. You will see the wire harness running down the right side. Toward the top you will see a black heat shrink section of wiring, inside here is a fuse.
		WWW

User Profile View All Posts by User View Thanks

mailachefski		#3 Posted : Thursday, August 18, 2016 5:19:45 AM(UTC)
Rank: Member Groups: Registered Joined: 2/25/2011(UTC) Posts: 6		I got home late last night from work and opened up all the electrical tape bindings and such . I was unable to locate a fuse. I'll be checking again soon.


User Profile View All Posts by User View Thanks

mailachefski		#4 Posted : Thursday, August 18, 2016 6:19:01 AM(UTC)
Rank: Member Groups: Registered Joined: 2/25/2011(UTC) Posts: 6		No luck finding a fuse. I had my wife take a look too. Any other thoughts? How can i check to see if the motor is functioning? getting power?


User Profile View All Posts by User View Thanks

brobriffin		#5 Posted : Thursday, August 18, 2016 5:51:04 PM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		If you have a multimeter check if you have 110/120v at the motor. When the unit is on and set to be in agitate or spin mode with the lid closed.
		WWW

User Profile View All Posts by User View Thanks

abadfish66		#6 Posted : Friday, August 19, 2016 5:17:57 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		This model actually does not have a fuse. Check the lid switch for a torn wire. Open the front and locate, should have an orange and yellow wire if im not mistaken.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close