Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
speddler1  
#1 Posted : Tuesday, October 13, 2015 9:51:10 AM(UTC)
speddler1

Rank: Member

Groups: Registered
Joined: 10/13/2015(UTC)
Posts: 1

Hi, I was having trouble with my top load washer not spinning properly. When I investigated, I found that the belt was completely shot. After replacing the belt everything looked and sounded fine except at the end of the wash cycle the clothes were very wet and there was still fabric softener in the dispenser. Ran another rinse cycle and watched it more closely. It sounded like it was working fine but it was spinning slowly and clothes were still very wet. It was a small load with just a few t-shirts and shorts.
Thank you for any suggestions.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Wednesday, October 14, 2015 5:29:39 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Try operating it with the front panel off and see if there is anything between the tub and basket or something in the pump that would slow things down. And observe the belt and motor, it may be the transmission is hung up and burning up the belt. But with the front panel off hopefully you can see what the problem is.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.