3 Pages123> Go to Page...

Washing machine starts spinning then stops Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: WJRR4170E4WW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

Darcellina		#1 Posted : Saturday, July 11, 2015 8:47:07 PM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		Machine starts to spin and then stops. Agitation and everything else works. Tried typical trouble shooting such as opening and closing lid 6 times. Checked the hose and no blockage. Thanks.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

sidfink43		#2 Posted : Monday, July 13, 2015 6:25:15 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Since it does start to spin this sounds like a timer issue, although check the lid switch which may be cutting out on you for some reason. If you decide to replace the timer and buy from this site you can return the part if it does not fix the problem.
User Profile View All Posts by User View Thanks

Darcellina		#3 Posted : Monday, July 13, 2015 7:41:10 AM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		Thank you. Now it won't spin at all. I hear a light whirling sound though at the beginning of the cycle as if the drum is trying to spin. :(
User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Monday, July 13, 2015 9:54:15 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		That sound may be the electric pump, but anyway you should take the front panel off, which you can do by inserting a thin bladed screw driver or putty knife in the gap between the top and front near the edges to release the clips that hold the front panel on. Then set the machine to spin and see if the motor is turning. If not, the timer may be the issue.
User Profile View All Posts by User View Thanks

Darcellina		#5 Posted : Monday, July 13, 2015 1:44:14 PM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		Thanks, I will try that. I think there are some screws that require an Allen wrench but I will try and get it open to check. Thanks again.
User Profile View All Posts by User View Thanks

sidfink43		#6 Posted : Tuesday, July 14, 2015 3:47:08 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Great, let us know how it turns out.
User Profile View All Posts by User View Thanks

Darcellina		#7 Posted : Tuesday, July 14, 2015 9:33:47 AM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		Is it possible to get a quote on a timer for this model? Just curious what I'm facing price-wise if that's the issue :)
User Profile View All Posts by User View Thanks

Darcellina		#8 Posted : Tuesday, July 14, 2015 9:37:12 AM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		Never mind, I actually just saw where to locate and look up prices for parts on this site. Thanks.
User Profile View All Posts by User View Thanks

Darcellina		#9 Posted : Wednesday, July 15, 2015 10:57:18 AM(UTC)
Rank: Member Groups: Registered Joined: 7/11/2015(UTC) Posts: 6		So I got the lid open and turned on the spin function in every cycle. The motor appears to be running - no spinning still and I do hear a light clicking sound. Ideas?
User Profile View All Posts by User View Thanks

sidfink43		#10 Posted : Wednesday, July 15, 2015 11:39:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		If the pulley on the transmission shaft is turning freely this suggests your problem is with the transmission. In this case I think a new basic top loader will be a better decision then attempting to fix this one.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

3 Pages123> Go to Page...