Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag power cable wiring help needed
Options
Go to last post Go to first unread
Model: PERFORMANCE PLUS Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
snmb95  
#1 Posted : Friday, November 28, 2014 11:57:29 AM(UTC)
snmb95

Rank: Member

Groups: Registered
Joined: 11/28/2014(UTC)
Posts: 4
I went to change to a 4 prong power cable and when I did, some of the other wires that were on the power posts slid off. I'm not sure where they go now. I have attached a picture of how I have it wired now, but doubt that it is correct. I am mostly concerned about the 2 wires that I have drawn arrows to in the attachment, but would love to hear if you see something else wrong as well. The dryer will run this way, but I thought it might be too hot and might smell something burning, so I cut it off and came here. I could just be paranoid, but wanted to make sure. Thanks in advance for you help!
snmb95 attached the following image(s):
wiring.jpg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Friday, November 28, 2014 1:03:08 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
A model number may be useful.
May be able to find a wiring diagram or install sheet for it.
Find your model number - AppliancePartsPros.com
THIS FORUM IS DEAD!!!!!!!
Back to top
snmb95  
#3 Posted : Friday, November 28, 2014 3:19:34 PM(UTC)
snmb95

Rank: Member

Groups: Registered
Joined: 11/28/2014(UTC)
Posts: 4
Thanks! The Model # is Maytag LDE8704ACE.
Back to top
denman  
#4 Posted : Friday, November 28, 2014 11:45:19 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag LDE8704ACE Dryer - AppliancePartsPros.com

Here is a service manual.
http://appliancejunk.com...e&id=53;t=1417249492
You will have to join the site and be logged in to be able to download the manual.

Install info is on page 1-13.
The wiring diagram is on page 5-40.

The ground strap is item 4 in section 02 of the parts.

Just a couple things.

I am assuming that your line cord is 4 prong and also 4 wire.
And that the green/ground wire is out of shot in the picture.
The difference between 3 and 4 wire is:
On 3 wire the ground and Neutral are the same.
On four wire the ground and Neutral are separate.

Though not a safety issue L1 and L2 are reversed.
So the black cord wire should go to the upper terminal with the black and yellow/black wires.
The red cord wire then goes to the lower terminal with the blue wire.

The ground strap should be disconnected and then the line cord ground wire (green) is connected to the frame screw.
The white cord wire stays connected to the center terminal.
THIS FORUM IS DEAD!!!!!!!
Back to top
snmb95  
#5 Posted : Sunday, November 30, 2014 6:16:30 PM(UTC)
snmb95

Rank: Member

Groups: Registered
Joined: 11/28/2014(UTC)
Posts: 4
Thank you so much! That was the exact information I needed.
Back to top
denman  
#6 Posted : Monday, December 1, 2014 3:30:19 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You are welcome.

I am glad I could help you out.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET