electric heat element glowing with dyer off and door open - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

electric heat element glowing with dyer off and door open Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: SERIES 70	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

albertb		#1 Posted : Tuesday, November 18, 2014 5:53:06 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2014(UTC) Posts: 2		during use chassis was extremely hot. cleaned vent, seemed to be ok for a few weeks. first load of the day opened door and saw element was glowing. found coil was touching the mounting bracket and bent it back in place. seems to work ok, thermostat appears to cycle normally, drum turns, vent blower works. still worried coil may heat up spontaneously ??


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, November 19, 2014 12:27:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		A model number may help others help you. Find your model number - AppliancePartsPros.com Also was the timer at the Off position?
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

albertb		#3 Posted : Tuesday, November 25, 2014 1:12:03 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2014(UTC) Posts: 2		Originally Posted by: denman A model number may help others help you. Find your model number - AppliancePartsPros.com Also was the timer at the Off position? model is Kenmore 70 series. don't know if timer was in off position


User Profile View All Posts by User View Thanks

denman		#4 Posted : Tuesday, November 25, 2014 3:27:49 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Need a model number. With just a series number I cannot find a wiring diagram. It is a Kenmore so their model numbers are usually 3 numbers, a period and then an additional 8 numbers
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close