Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
badblue06  
#1 Posted : Sunday, August 3, 2014 6:54:58 AM(UTC)
badblue06

Rank: Member

Groups: Registered
Joined: 8/3/2014(UTC)
Posts: 2

Hi, my dishwasher ejector pump wont stop running. The pump is working and draining dishwasher, it just wont stop running. I even removed the drain tube under the dishwasher just to make sure all the water was out. I also remove the spray arm and strainer screen and cleaned everything out in the sump. It still wont stop running. I see there is a sensor in the bottom of the sump, my best guess is the sensor is bad? Is that sensor what tells the pump to turn off when the water is out? Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, August 6, 2014 2:26:00 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Frigidaire FGHD2433KF1 Dishwasher - AppliancePartsPros.com

Here is the tech sheet
http://manuals.frigidaire.com/p...f/Kinston/154768201b.pdf

I see there is a sensor in the bottom of the sump, my best guess is the sensor is bad? Is that sensor what tells the pump to turn off when the water is out?
I doubt it, more likely the control board is bad.
Draining is just a timed event.
Unless the turbidity sensor is doing something weird.

Have you tried removing power from the unit for a couple minutes to see if it will reset.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.