Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Circuit breaker keeps tripping
Options
Go to last post Go to first unread
Model: WED8300SW1 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
paulrk  
#1 Posted : Tuesday, February 25, 2014 12:46:51 PM(UTC)
paulrk

Rank: Member

Groups: Registered
Joined: 2/25/2014(UTC)
Posts: 1
I just cleaned out the dust and lint from inside the cabinet and duct work of my Whirlpool Duet Sport Dryer. I went to dry the first load and as soon as I hit the START button it made a loud pop and tripped the circuit breaker. (first time ever) I opened it up again and searched for any signs of shorted out wires and found nothing. no singes anywhere. I put it back together again and tried again. The control panel lights up when you press the POWER button and you can change the settings as normal, but as soon as you press the START button it make the loud "pop" and trips the breaker. Do I need a new control panel? Can just the START button be bad and can that part only be replaced? I am not very savvy when it come to electronic stuff... Need some help. Thanks, Paul
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Tuesday, February 25, 2014 2:58:52 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
You probably have shorted something to ground while in there cleaning the lint. Check the terminal connections on the belt switch, thermal fuse, thermal cutoff, hi-limit thermostat, heater coil and exhaust thermistor.

Eric
Back to top
akif  
#3 Posted : Tuesday, February 25, 2014 10:19:35 PM(UTC)
akif

Rank: Member

Groups: Registered
Joined: 2/25/2014(UTC)
Posts: 1
It can be any thing but first of all start from checking electromagnatic filter with multi meter if it gives continuty beep then it is the fault.
Back to top
denman  
#4 Posted : Wednesday, February 26, 2014 1:03:05 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
http://www.appliancepartspros.c...ch.aspx?model=wed8300sw1

See the attachment or the tech sheet.
It may be useful tracking down the short.

Finally below is a link to a manual.
You will have to join the site and be logged in to be able to download it.
http://appliancejunk.com...&id=100;t=1393409175
File Attachment(s):
WED8300.pdf (405kb) downloaded 5 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Similar Topics
Circuit breaker keeps tripping (Dryer Repair)
by Johhar23 9/2/2014 2:11:37 AM(UTC)
Main circuit breaker keeps tripping (Dryer Repair)
by wing63 6/5/2012 7:00:26 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET