Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jmrdmd  
#1 Posted : Tuesday, January 14, 2014 11:07:58 AM(UTC)
jmrdmd

Rank: Member

Groups: Registered
Joined: 1/14/2014(UTC)
Posts: 4

Hi All,
My Kenmore Elite French Door Refrigerator model # 795.75192401 occasionally locks into a continuous run mode when you open the door. If left this way it will freeze all the food in the upper area. It beeps and then the temperature read out looks like the attached picture. It will reset and run normally for a while if you unplug and plug back in. Other than this annoyance it works fine.
Thank you for your help.
Jan
jmrdmd attached the following image(s):
Kenmore.JPG
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
jmrdmd  
#2 Posted : Thursday, January 16, 2014 4:40:14 AM(UTC)
jmrdmd

Rank: Member

Groups: Registered
Joined: 1/14/2014(UTC)
Posts: 4

Any help please?
richappy  
#3 Posted : Friday, January 17, 2014 3:04:42 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Put your model # in the online Sears parts site and locate the main control board, probably a sticking relay on the board.
jmrdmd  
#4 Posted : Monday, January 20, 2014 11:14:47 AM(UTC)
jmrdmd

Rank: Member

Groups: Registered
Joined: 1/14/2014(UTC)
Posts: 4

Thanks so much for the help...I ordered the board from Sears. Is it behind the cover in the rear?
Thanks again
Jan
richappy  
#5 Posted : Tuesday, January 21, 2014 12:28:48 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I think this is an LG refrigerator. Control board probably behind the cover in the back.
jmrdmd  
#6 Posted : Tuesday, January 21, 2014 3:16:28 AM(UTC)
jmrdmd

Rank: Member

Groups: Registered
Joined: 1/14/2014(UTC)
Posts: 4

Thanks...board is coming today. I'll keep you posted.
Jan
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.