Jennair Oven Problems! - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Jennair Oven Problems! Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JGS8850ADS	Brand: Jenn-Air	Age: 5 - 10 years
Previous Topic Next Topic

dazras		#1 Posted : Monday, March 18, 2013 7:03:17 PM(UTC)
Rank: Member Groups: Registered Joined: 1/5/2013(UTC) Posts: 2		Hi! We have a Jenn Air Slide in Range that's been giving us problems. The first was F1-1 code when heating up. I replaced the temperature sensor and door switch (the upper right one with the plunger). It seemed to work fine a couple times after that, but today it wouldn't heat up aftrer being on bake for 10 minutes, so we hit cancel and we got a F1-C code a few minutes later. And now the oven light won't come on when the door open. Any help is appreciated! Thanks! Doug


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, March 19, 2013 4:45:23 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Doug, Have you tested the temperature sensor before you replaced it or it was just a guessing? Very likely the problem is a bad control board aka a clock. - The control board Part number: 74007217 Here are the breakdown diagrams and Parts for Jenn-Air JGS8850ADS Range - AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

dazras		#3 Posted : Tuesday, March 19, 2013 6:37:06 PM(UTC)
Rank: Member Groups: Registered Joined: 1/5/2013(UTC) Posts: 2		Hi Gene, the temp sensor was in spec at room temp, but I replaced it anyway. I will get a control panel. Thanks for the help! Doug


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, March 19, 2013 6:55:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome Doug. Keep us posted. Gene.


User Profile View All Posts by User View Thanks

jimtone		#5 Posted : Saturday, September 12, 2015 1:55:01 PM(UTC)
Rank: Member Groups: Registered Joined: 12/18/2010(UTC) Posts: 11		Oven won't heat up in regular amount of time. If we set it to 300 degrees it will take half an hour if it even gets to that then? When it was working correct it would make a gas valve squeal sound when the valve would open, but this isn't happening at the very beginning now. Is there something I should meter to check for continuity? Do you think it could be the temp. sensor?


User Profile View All Posts by User View Thanks

jimtone		#6 Posted : Tuesday, September 15, 2015 11:01:56 AM(UTC)
Rank: Member Groups: Registered Joined: 12/18/2010(UTC) Posts: 11		Originally Posted by: Gene You are welcome Doug. Keep us posted. Gene. Oven won't heat up in regular amount of time. If we set it to 300 degrees it will take half an hour if it even gets to that then? When it was working correct it would make a gas valve squeal sound when the valve would open, but this isn't happening at the very beginning now. Is there something I should meter to check for continuity? Do you think it could be the temp. sensor? Read more: http://forum.appliancepartspros...blems.html#ixzz3lprUVjsM Appliance Repair Forum - Free Service from Appliance Parts Pros


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close