Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Accubake Electric Range
Options
Go to last post Go to first unread
Model: 8113P680-60 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
Ghosthunter123  
#1 Posted : Monday, February 25, 2013 6:02:20 AM(UTC)
Ghosthunter123

Rank: Member

Groups: Registered
Joined: 2/25/2013(UTC)
Posts: 2
Hello!

My first time on the forum, just wondering if the experts could help me diagnose / suggest solutions one of my problems :(

The majority of the buttons on the control panel of my electric range suddenly does not work. More specifically, the stove top works fine, it's just the oven control panel.

Clock still displays, and if I can press "Clock" to edit it (but none of the number buttons work). I can start "Broil", but the "Bake" button doesn't work.

Really appreciate any help and response!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Tuesday, February 26, 2013 1:32:59 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I cannot find any info on the given model number.
Please check it.
Find your model number - AppliancePartsPros.com
THIS FORUM IS DEAD!!!!!!!
Back to top
Ghosthunter123  
#3 Posted : Tuesday, February 26, 2013 5:14:32 AM(UTC)
Ghosthunter123

Rank: Member

Groups: Registered
Joined: 2/25/2013(UTC)
Posts: 2
Thanks for the link to help find the model number! This is my model number: W101141731A
Back to top
denman  
#4 Posted : Wednesday, February 27, 2013 12:59:04 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Sorry but I still cannot find any info on this unit.
Tried at AppliancePartsPros and the Whirlpool site.

If the unit uses a separate control panel (keypad) and control board (timer/clock) you may want to try the following.

Unplug the unit
Open it up
Remove the ribbon cable from the keypad to the control board at the control board.
Clean the edge connector. Use electronics contact cleaner or isopropyl alcohol.
If it is the type where there is not a connector just the insulation is removed, it can be cleaned with a pencil eraser. Do not use an ink eraser as it is too abrasive.
Check the tracks in the ribbon cable for hairline cracks. A magnifying glass helps here.
Would not hurt to clean the connector on the board. Use electronics contact cleaner or isopropyl alcohol and a tooth brush. Be gentle and do not reconnect till all the solvent evaporates.
Reconnect everything and give it a try.


If the unit has the keypad and timer as one peice then it is probably
the timer. You may also need an overlay as they are usually glued to the timer and can be difficult to get off/
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Whirlpool Accubake Electric Range (Oven Repair (including Ranges and Cooktops))
by RT White 11/6/2012 1:45:23 PM(UTC)
Whirlpool Accubake Electric Range (Oven Repair (including Ranges and Cooktops))
by Baronesskai 9/26/2012 3:28:20 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET