Washer goes out of balance during spin cycle a lot - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Washer goes out of balance during spin cycle a lot Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 80 SERIES	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

bobtx		#1 Posted : Thursday, February 21, 2013 11:28:35 AM(UTC)
Rank: Member Groups: Registered Joined: 8/21/2007(UTC) Posts: 5		Quite frequently, now, the spin cycle throws the tub out of balance. Used to hardly happen. Just guessing...if belt driven, could it need new belt. Model # is 82980820 Thanks Bob


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Thursday, February 21, 2013 1:30:20 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Please provide the complete model number of the unit. Simon.


User Profile View All Posts by User View Thanks

bobtx		#3 Posted : Friday, February 22, 2013 2:08:31 PM(UTC)
Rank: Member Groups: Registered Joined: 8/21/2007(UTC) Posts: 5		The model # for my Kenmore washer is 82980820


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Thursday, February 28, 2013 11:56:45 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Assuming that the complete model number is 110.82980820 you should check the 4 suspension springs and specially one at the back, then see if the the skate plate under the tub is properly positioned on the support, and of course the rear legs. There is one more thing to check: There are four locking pins - one in each corner of the base Part number: 285771 If any of those pins are broken or bent and not holding the cabinet, the washer will shake. Simon.


User Profile View All Posts by User View Thanks

bobtx		#5 Posted : Thursday, February 28, 2013 7:50:16 PM(UTC)
Rank: Member Groups: Registered Joined: 8/21/2007(UTC) Posts: 5		Originally Posted by: Simon / APP Team Hi. Assuming that the complete model number is 110.82980820 you should check the 4 suspension springs and specially one at the back, then see if the the skate plate under the tub is properly positioned on the support, and of course the rear legs. There is one more thing to check: There are four locking pins - one in each corner of the base Part number: 285771 If any of those pins are broken or bent and not holding the cabinet, the washer will shake. Simon. Thanks, Simon, I will check it out


User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Friday, March 1, 2013 10:48:07 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Please, post the results. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close