Maytag Dryer Code SE - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Maytag Dryer Code SE Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MDE2400AYW	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

cwdean		#1 Posted : Monday, February 11, 2013 9:20:06 AM(UTC)
Rank: Member Groups: Registered Joined: 2/11/2013(UTC) Posts: 2		I have a stackable Maytag Dryer that is working , but not drying well. It shows a code of SE - or maybe it is 5E - and I cannot find any info on this. Any help is appreciated!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Monday, February 11, 2013 3:32:41 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Sorry. Was not able to locate the diagnostic codes for this model. But I'd recommend you to check the air flow trough the dryer and entire vent to the outside for the restrictions. Also check the thermistor. Locate the 6 pins/4 wires plug at the control board and check the resistance between R and WH. At room temp. - 60Kohm. Here are the breakdown diagrams and 02-Cabinet parts for Maytag MDE2400AYW - AppliancePartsPros.com Post the results. Simon.


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Monday, February 11, 2013 3:37:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hello, There are no error codes listed for this model. If the problem is longer time to dry then I would suggest to clean the dryer and the vent line. You also may want to check the thermistor (on the blower housing). The normal reading is 60K ohms at the room temperature. - The thermistor Part number: 35001056 Here are the breakdown diagrams and Parts for Maytag MDE2400AYW Dryer - AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

cwdean		#4 Posted : Monday, February 18, 2013 5:10:42 PM(UTC)
Rank: Member Groups: Registered Joined: 2/11/2013(UTC) Posts: 2		Originally Posted by: cwdean I have a stackable Maytag Dryer that is working , but not drying well. It shows a code of SE - or maybe it is 5E - and I cannot find any info on this. Any help is appreciated! 2-18-13 We checked the Termistor, THOROUGHLY cleaned the dryer andexhaust vent, all parts "seem" to be ok with meter. But it only heats to 100 deg F. Any ideas?


User Profile View All Posts by User View Thanks

Gene		#5 Posted : Tuesday, February 19, 2013 2:41:01 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the serial number of the dryer? Where is the dryer located and what is the ambient temperature? Remove the thermistor and check if it has a silicone rubber boot at the sensing bulb. If it does then remove that boot and give it a try. Gene


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close