Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Pure Guava  
#1 Posted : Saturday, January 26, 2013 10:10:59 PM(UTC)
Pure Guava

Rank: Member

Groups: Registered
Joined: 1/26/2013(UTC)
Posts: 3

The washer makes this horrible grinding noise, when it tries to agitate or tries to spin.

Fills: Yes
Drains: Yes
Agitate: No (horrible grindy sound)
Spin: No (horrible grindy sound)
Coupler: Has all groves and been cleaned or residue
Agitator: All material and foreign objects are cleaned and removed from under

Any ideas (on what to do or where to start)?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Pure Guava  
#2 Posted : Saturday, January 26, 2013 10:47:41 PM(UTC)
Pure Guava

Rank: Member

Groups: Registered
Joined: 1/26/2013(UTC)
Posts: 3

I added an attachment.

When it is on agitation (didn't think to do a spin one), the [COLOR="Green"]green[/COLOR] part kinda (tries) to move clockwise and counterclockwise, in a jerky motion. The [COLOR="Red"]red[/COLOR] parts don't move, but can be manually turned.

Sorry if it is upside-down. The photo editing software is horrible.
Pure Guava attached the following image(s):
20130127_013043 (2).jpg
fairbank56  
#3 Posted : Sunday, January 27, 2013 4:28:02 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Looks like the clip is missing from the motor shaft and the pulley/clutch has dropped. Should look like this.

Added: I see the clip laying there, looks like it broke. Here's the replacement.

UserPostedImage

Eric
Pure Guava  
#4 Posted : Sunday, January 27, 2013 9:18:31 AM(UTC)
Pure Guava

Rank: Member

Groups: Registered
Joined: 1/26/2013(UTC)
Posts: 3

Originally Posted by: fairbank56 Go to Quoted Post
Looks like the clip is missing from the motor shaft and the pulley/clutch has dropped. Should look like this.

Added: I see the clip laying there, looks like it broke. Here's the replacement.

UserPostedImage

Eric


The clutch clip was bent out on one end, so I readjusted it and pulled out the little tab in the back/far end which holds it in place and... voila! It works fine!

First DIY fix, that could have taken far more time and money, that took less than 10 min!

Thanks!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.