Rank: Member
Groups: Registered
Joined: 1/14/2013(UTC)
Posts: 5
|
Refrigerator and Freezer quit cooling. Compressor makes clicking sound but is real hot. Fan on condenser turns real slow. Any suggestions as to what problem might be? Is condenser fan supposed to fun faster?
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi. Cool down the compressor, remove the start devise and check continuity between the 3 compressor's pins (continuity between all three of them).Next check one of the pins to the ground - you should have no continuity. Next check if there is 120VAC to the start devise between two wires going to it. If there is proper voltage - replace the start devise Part number: WR07X10097
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
|
Originally Posted by: gdaddy  Is condenser fan supposed to fun faster? Yes the fan should be running fast. I suspect the board isn’t sending full power to the fan. See if it appears the fan in the freezer is running slowly too. If so you can be sure the board is bad. If the freezer fan is running fine check voltage to the condenser fan as well as fan motor supply voltage. If the fan is getting correct voltage but running slow as you describe replace the fan but if the fan isn’t getting correct voltage replace the main board. This page has instructions and pictures that should help with this. GE Refrigerator Fan Motor Diagnostics
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/14/2013(UTC)
Posts: 5
|
Replaced compressor relay. Voltage to compressor fan is 14. Have ordered new fan motor. While waiting for motor I have placed small fan to blow on compressor and coils. Refrigerator and freezer are cooling like they should. Great suggestions and directions. Thanks.
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
Make sure the condenser coils are clean and the cover is in it's place.
Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/14/2013(UTC)
Posts: 5
|
Have received new condenser fan motor. It runs slower than old motor. Rechecked the voltage and get 13.6v for both the supply and fan tests. New motor will not turn when held with the fan facing the coils but will slowly turn when held with fan facing up or down. Strange! Any suggestions.
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
You should replace the main control board together with the motor and BTW get another condenser motor.
Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/14/2013(UTC)
Posts: 5
|
Have returned motor for replacement and have received new m-board. Will wait to check new motor before trying to replace board. Thanks for reply.
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/14/2013(UTC)
Posts: 5
|
New board and compressor fan installed & all seems to be running fine. Is there any thing that can be done with used main board and/or old fan motor?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
