Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
CF3501  
#1 Posted : Wednesday, October 10, 2012 4:57:57 PM(UTC)
CF3501

Rank: Member

Groups: Registered
Joined: 10/10/2012(UTC)
Posts: 2

Tonight we smelled a plastic/electrical burning smell in the kitchen and I have figured out it is the capacitor on our fridge. Other details: behind the fridge needed to be vaccumed, as did the fan area and condensor area once I removed the back panel (though it didn't seem too bad...). The fan was running and the top of the condensor was very hot (almost didn't want to keep my hand on top). After I clean everything I plugged it back in and saw a little smoke come from the capacitor. I unplugged the fridge again and removed the capacitor and smelled it - that was the plastic burning smell we smelled earlier. Not sure how to proceed at this point. Any advice is appreciated.

Thank you.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Thursday, October 11, 2012 3:01:51 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I assume your fridg. temperatures are ok. If the capacitor plugs in the start device, that'a a run capacitor WR62X79. Should replace it soon as it adds running torque to the motor to prevent stall.
CF3501  
#3 Posted : Thursday, October 11, 2012 5:08:27 AM(UTC)
CF3501

Rank: Member

Groups: Registered
Joined: 10/10/2012(UTC)
Posts: 2

Yes the fridge temp was OK before I unplugged (left it unplugged and took out the food last night). Capacitor plugs into Overload part "735" (not sure if that is the same as the "start device" you mentioned). If yes, I will replace WR62X79 and see if that works. Thank you.
richappy  
#4 Posted : Thursday, October 11, 2012 9:03:09 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Yes, the overload contains the start device.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.