Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Fabric Softener Dispenser Problem on Whirlpool LA7680
Options
Go to last post Go to first unread
Model: LA7680XTWO Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
skuddle  
#1 Posted : Tuesday, November 29, 2011 9:34:26 AM(UTC)
skuddle

Rank: Member

Groups: Registered
Joined: 5/15/2010(UTC)
Posts: 15
Dispenser not dispensing.Suspect a clogged line or a dispenser valve problem. I could not find any kind dispenser control for this model on this website. Does this model have one and if not, what controls the flow of the softener into the tub?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Wednesday, November 30, 2011 5:37:48 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
There is no line or valve that control the fabric softener dispenser.

Pull it out of the agitator and soak it in many changes of hot water for about three days. These things get all gunky with that stuff.
Back to top
skuddle  
#3 Posted : Thursday, December 1, 2011 8:54:01 PM(UTC)
skuddle

Rank: Member

Groups: Registered
Joined: 5/15/2010(UTC)
Posts: 15
After reading your reply I pulled the softener can out of the agitator and mucked it out like you suggested. While I did that, the XYL mucked out the little holes in the agitator where the softener exits during the spin cycle. They were pretty much clogged up.

Works like a charm now. Thanks! :)
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET