Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
RMuller  
#1 Posted : Tuesday, December 18, 2007 11:47:53 AM(UTC)
RMuller

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 2

Replaced a GREAT working GE microwave-- with a whirlpool MH3184xp SI
had problems from the first week on. We changed to stainless
steel --- should have kept the GE. Door switches went out of
adjustment, Repairman said case was to thin so he pulled
out on the latch and it began working!! Now we have power to every thing switches work,lights work, but when pushing the start button there's a (click) and the fans run--soundslike its working but NO HEAT!!!! So Whirlpool is a greatlooking microwave, but don't count on it. Repair man not sure so wants to replacemagnetron, diode, and TCO, we paid $60.00for this shotgun diagnostic expertise.The cost to (REPAIR) $396.00 The micro is 2 years and 2 months OLD ,MFG DATED
Sept . 05 We changed all of our appliences to stainless Whirlpool. Is there any help, we have not repaired so-----PLEASE HELP!!
:mad: At that price we could buy a new microwave.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
SDEE  
#2 Posted : Wednesday, December 26, 2007 7:26:53 AM(UTC)
SDEE

Rank: Member

Groups: Registered
Joined: 12/26/2007(UTC)
Posts: 1

We have a 2005 Whirlpool Gold microwave that has worked ok until Christmas eve . . . it failed to turn off at the end of a timed cooking cycle. We unplugged it and tried it again, but it continues to run. The repairman is scheduled for tomorrow . . . from your experience it doesn't look good. Consumer reports rates one of the Whirlpool's as "good", but their products have been disappointing. :(
RMuller  
#3 Posted : Wednesday, December 26, 2007 5:03:41 PM(UTC)
RMuller

Rank: Member

Groups: Registered
Joined: 12/18/2007(UTC)
Posts: 2

Originally Posted by: RMuller Go to Quoted Post
Replaced a GREAT working GE microwave-- with a whirlpool MH3184xp SI
had problems from the first week on. We changed to stainless
steel --- should have kept the GE. Door switches went out of
adjustment, Repairman said case was to thin so he pulled
out on the latch and it began working!! Now we have power to every thing switches work,lights work, but when pushing the start button there's a (click) and the fans run--soundslike its working but NO HEAT!!!! So Whirlpool is a greatlooking microwave, but don't count on it. Repair man not sure so wants to replacemagnetron, diode, and TCO, we paid $60.00for this shotgun diagnostic expertise.The cost to (REPAIR) $396.00 The micro is 2 years and 2 months OLD ,MFG DATED
Sept . 05 We changed all of our appliences to stainless Whirlpool. Is there any help, we have not repaired so-----PLEASE HELP!!
:mad: At that price we could buy a new microwave.

Mr. Muller,
Thank You for your reply.

We are sorry that you are not satisfied with our response.

Unfortunately we are unable to look into exchange unless an unit was deemed unrepairable by an Authorized Service Technician. Our warranty is for repair only.

We apologize for the inconvenience that this has caused you.

Thank You,

Nicole F.
Whirlpool Customer Loyalty Team







[THREAD ID:1-5ZEEUJ]



-----Original Message-----

From: [EMAIL="eimuller@cox.net"]eimuller@cox.net[/EMAIL]
> Sent: 12/21/2007 12:52:41 PM
To: [EMAIL="whirlpool_customerexperience@whirlpool.com"]whirlpool_customerexperience@whirlpool.com[/EMAIL]
Subject: Whirlpool.com Email Us Form Submission

NICOLE,

HOW WOULD YOU FEEL IF YOU HAD REPLACED YOUR GOOD WORKING GE. APPLIANCES
WITH STAINLESS WHIRLPOOL, ONLY TO HAVE THE PROBLEMS WE HAVE HAD IN TWO
YEARS?
YES, LOWE'S OFFERED 10% OFF IF WE WOULD SPEND $400.00 FOR A NEW SAME
MODEL MICROWAVE. WITH ONLY TWO PEOPLE USING THE MICROWAVE FOR TWO YEARS,
THIS IS OBVIOUSLY A MANUFACTURER'S DEFECT. THIS WAS ONLY ONE REQUEST IN---
I'M SURE THOUSANDS OF OTHER WHIRLPOOL APPLIANCE OWNERS' EMAILS EACH WEEK
HAVING PROBLEMS!

THE PR AND RETENTION OF A LONG TIME WHILRPOOL OWNER SHOULD OUT WEIGH THE
SMALL COST OF REPAIR. WE WOULD LIKE YOU TO RECONSIDER OUR REQUEST WITH A
MORE REASONABLE SOLUTION.

THANK YOU, RON MULLER

----- Original Message -----
From: <[EMAIL="whirlpool_customerexperience@whirlpool.com"]whirlpool_customerexperience@whirlpool.com[/EMAIL]>
To: <[EMAIL="eimuller@cox.net"]eimuller@cox.net[/EMAIL]>
Sent: Friday, December 21, 2007 9:37 AM
Subject: RE: Whirlpool.com Email Us Form Submission


> Dear Mr. Muller:
> > Thank you for visiting the Whirlpool website, we appreciate hearing from
you.
> > We do apologize for the trouble that you are having with your Microwave.
> > I did look into your file and see that a representative did offer you an
repurchase incentive. At this time there is no further assistance available
due to the age of your Microwave.
> > We do apologize for any inconvenience that this may have caused you.
> > Thank you for allowing us to assist you today.
> > You are a valued customer and we apologize for any inconvenience this
concern may have caused.
> > We invite you to contact Whirlpool again either by calling (866) 698-2538
between 8:00am to 8:00pm EST weekdays or by emailing whenever the need
arises. When calling please press the available option or stay on the line
to reach a representative.
> > Sincerely,
> > Nicole F.
> Whirlpool Customer Loyalty Team
> Whirlpool Customer eXperience Center
> http://www.Whirlpool.com
> > *If replying, please use Forward verses Reply or New as that will leave
this message intact and will help us to respond faster.
> >
> >
> >
> > [THREAD ID:1-5ZEEUJ]
> >
> > -----Original Message-----
> > From: [EMAIL="eimuller@cox.net"]eimuller@cox.net[/EMAIL]
> Sent: 12/18/2007 12:59:30 PM
> To: [EMAIL="whirlpool_customerexperience@whirlpool.com"]whirlpool_customerexperience@whirlpool.com[/EMAIL]
> Subject: Whirlpool.com Email Us Form Submission
> >
> class: CIC
> form: Whirlpool Experience
> subject: MH3184XP SI
> first_name: Ronald
> last_name: Muller
> add1: .
> add2:
> city: > state: AZ
> zip: 85249
> web_form_email: [EMAIL="eimuller@cox.net"]eimuller@cox.net[/EMAIL]
> contact_by_ph: 480 726 3125
> fax_ph:
> model: MH3184XP SI
> serial: TRS2013583
> contact_method: Email
> product: Microwave,MHC
> body: Replaced a GREAT working GE microwave with a MH3184xp SI
> had problem from the first week on. We changed to stainless
> steel --- should have kept the GE. Door switches out of
> adjustment, Repairman said case was to thin so he pulled
> out on the latch and it began working!! Now we have power to every thing
switches work,lights work, but when pushing the start button there's a
(click) and the fans run--sounds
> like its working but NO HEAT!!!! So Whirlpool is a great
> looking microwave, but don't count on it. Repair man not sure so wants to
replace
> magnetron, diode, and TCO, we paid $60.00 for this shotgun diagnostic
expertise.
> The cost to (REPAIR) $396.00 The micro is 2 years and 2 months OLD ,MFG
DATED
> Sept . 05 We changed all of our appliences to stainless Whirlpool.
Is there any help
> available with our Microwave?
> Ron
Muller [EMAIL="eimuller@cox.net"]eimuller@cox.net[/EMAIL]
> > regarding: Owner Support
> optin_method: No


THANKYOU,

RON----------This is what I recieved from Whirlpool, going shopping for
a NEW microwave tomorrow---Last WHIRLPOOL for us--anything else is
BETTER!!!!!!!!!!!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.