Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
saosin123919  
#1 Posted : Saturday, May 23, 2009 9:03:07 AM(UTC)
saosin123919

Rank: Member

Groups: Registered
Joined: 5/19/2009(UTC)
Posts: 2

I have water to the water valve and not beyond.How do I test the valve to be sure it's broken? It has a ground and two terminals.Is it possible to bench test it since I have it off already..Thanks for your help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
woodchuckie  
#2 Posted : Saturday, May 23, 2009 12:12:35 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363

test the water inlet valve for continuity using a multitester. Set the multitester to the ohms setting X100 (if available, otherwise use the nearest ohm setting). Place a probe on each terminal. The multitester should display a reading of 200 to 500 ohms. Close inspection of the inlet valve and especially the coil may reveal the exact ohm resistance rating to test for. If the water inlet valve does not pass this test, it should be replaced.
saosin123919  
#3 Posted : Saturday, May 23, 2009 5:36:21 PM(UTC)
saosin123919

Rank: Member

Groups: Registered
Joined: 5/19/2009(UTC)
Posts: 2

Thanks Woodchuckie
It only read 50 ohms so from what you said I will need to replace it..thanks again
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.