Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Quiet Partner III won't start
Options
Go to last post Go to first unread
Model: GU2400XTPS1 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
gesworthy  
#1 Posted : Friday, April 24, 2009 9:06:16 AM(UTC)
gesworthy

Rank: Member

Groups: Registered
Joined: 4/24/2009(UTC)
Posts: 1
My Whirlpool Quiet Partner III model# GU2400XTPS1 has a rapidly flashing light over what would be the "normal" setting button. There are no breaks in this flashing, nor are any other lights showing. Any attempts I have made at pushing any other buttons has NO effect on this blinking whatsoever.

I don't know if there is a sequence whirlpool has programmed in that will allow me to reset it, or if pulling it out and unplugging it would amount to the same thing.:confused:

Does anybody know what this problem is and how I can fix it?

I'm new here but I would appreciate any help that could be provided.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, April 25, 2009 1:21:36 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the parts breakdown
Replacement parts for WHIRLPOOL GU2400XTPS1 | AppliancePartsPros.com

Here is a tech sheet
https://www.servicematters.com/d...0Sheet%20-%208535451.pdf

I don't know if there is a sequence whirlpool has programmed in that will allow me to reset it, or if pulling it out and unplugging it would amount to the same thing.
Unplugging it or tripping the breaker for half an hour or so, may reset it.

Does anybody know what this problem is and how I can fix it?
Could be a shorted key, remove the keypad ribbon cable from the control board and check it with a meter as per tech sheet.
THIS FORUM IS DEAD!!!!!!!
Back to top
rustythebailiff  
#3 Posted : Monday, May 18, 2009 6:36:57 PM(UTC)
rustythebailiff

Rank: Member

Groups: Registered
Joined: 5/18/2009(UTC)
Posts: 6
Is there a manual on disassembly? I have the exact same problem, and suspect the control unit has gone bad (co-incidentally right after warranty expired), but need to get an idea on how to pull the panel.
Back to top
rustythebailiff  
#4 Posted : Tuesday, May 19, 2009 2:02:21 PM(UTC)
rustythebailiff

Rank: Member

Groups: Registered
Joined: 5/18/2009(UTC)
Posts: 6
Actually, I tried a reset sequence I got from another forum, using the normal and heated dry buttons, and noticed that it is NOT the clean light that is flashing rapidly, but the normal button led. Does this sound familiar? I checked the trouble sheet on the wiring diagram but couldn't find anything.
Back to top
denman  
#5 Posted : Tuesday, May 19, 2009 5:26:26 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Not the same but I think the door comes apart the same as the below
https://secured.whirlpoo...520548/$FILE/8178022.pdf

Could be you have a stuck closed Normal key.
See the tech sheet on checking the keypad.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool Quiet Partner III Won't Start (Dishwasher Repair)
by hendricksd 10/23/2012 12:28:03 PM(UTC)
Whirlpool Quiet Partner III won't start (Dishwasher Repair)
by Birdieal 8/12/2009 10:49:18 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET