Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
kmacklin2  
#1 Posted : Friday, April 3, 2009 12:29:31 PM(UTC)
kmacklin2

Rank: Member

Groups: Registered
Joined: 4/3/2009(UTC)
Posts: 1

I accidentally pushed the "Clean" button, then "Cancel" and proceeded to push "Bake" and set the temperature. About 2 minutes later it started beeping and displayed "F8". I cancelled it and about 1-2 minutes later it started again. I cancelled both ovens (as directed in manual) with the same result. We then tried flipping the breaker to see it that would reset it. The "lock" light came on when we turned the power back on and I set the temperature - it flashed F1 after 1-2 minutes. Last attempt was to turn the power off for a longer time. After a few hours, I turned it back on and again got the "lock" light and then "F8".

In addition, about 6 months ago the convection portion of the top oven stopped working. We believe the oven is approximately 7 years old. We would not like to spend more than necessary, but are not sure how involved our problems are and whether we should repair or replace it. We can live without the convection portion depending on the total expense of the repairs. I would appreciate any help you can give me.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Saturday, April 4, 2009 12:37:58 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRG PLEB27T8ACA | AppliancePartsPros.com

Here is a wiring diagram
ftp://ftp.electrolux-na.com/Pr...assomption/318046110.pdf

Sounds like the door lock switches are out of sync.
F8 is a door lock issue.

Here is a couple things to try

1. Press and hold the door latch handle in the unlocked position and press Cancel for a few seconds.

2. Push the door interlock switch. Hold for 20 to 30 seconds. Should hear the door latch go to the unlock position. Release the switch. Turn oven to 350 for one minute and see if the error will clear. Also try pushing cancel for a few seconds while holding the door switch closed

Am not sure either of the above will work but worth a try.

Check for loose wires going to and at the door latch switches.
Check the switches with a meter.

On the convection pr4oblem could be the element is shot.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.