Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
dherriman  
#1 Posted : Sunday, March 29, 2009 10:34:28 AM(UTC)
dherriman

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 2

The clock display on my range is acting strange. The display will go off, and pressing the clock button will bring it back, along with a "start?" prompt. Then after a couple of minutes, the display will go out again. Hitting the start button also shuts off the display. I thought one of the function buttons were stuck on, but have determined that is not the case. Hitting the cancel button turns off the display, and hitting the clock button brings the clock display back up, and the time is always correct, but then the "start?" prompt comes back, and after a couple of minutes the display goes out again. I have tried cycling power a couple of times, but it did not help. All other functions are working correctly.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Sunday, March 29, 2009 12:18:28 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Press and hold the Clock button for 5 seconds. If it would not help then the control board most likely has gone bad.

- The part number for the control board is AP3837679

Here are the break down diagrams and Replacement parts for WHIRLPOOL GR448LXPB1 | AppliancePartsPros.com

Gene.
dherriman  
#3 Posted : Sunday, March 29, 2009 1:26:59 PM(UTC)
dherriman

Rank: Member

Groups: Registered
Joined: 3/29/2009(UTC)
Posts: 2

That seemed to take care of it. Thank you very much for your help.
Gene  
#4 Posted : Sunday, March 29, 2009 1:56:31 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad it was that simple.

Gene.
Guest  
#5 Posted : Sunday, March 14, 2021 12:03:31 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
And 12 years later the advice worked for me as well.
Guest  
#6 Posted : Saturday, March 20, 2021 5:30:59 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Yup. Me too.
Guest  
#7 Posted : Wednesday, March 31, 2021 8:37:11 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
This also just worked for my GMC305PDQ2 oven/microwave combo that had developed the same annoying problem. Thank you Gene from 12 years ago!
Guest  
#8 Posted : Friday, June 4, 2021 8:45:08 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
That advice just worked for me! - thanks.
Laura  
#9 Posted : Sunday, August 1, 2021 8:44:11 AM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
And for me! Thanks everyone. :-)
Guest  
#10 Posted : Monday, November 29, 2021 5:09:44 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Me too!! Thank you!!
Users browsing this topic
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.