Leaking and need the part Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GSD4800J01WW	Brand: GE	Age: 1 - 5 years
Previous Topic Next Topic

dmccorkle		#1 Posted : Friday, March 6, 2009 2:43:01 PM(UTC)
Rank: Member Groups: Registered Joined: 3/6/2009(UTC) Posts: 1		My dishwasher has always had a slight leak, but now it is really bad. I finally found that the leak is coming from a crack in an off white plastic piece underneath the dishwasher approx. in the middle. I am trying to figure out what the part number is, and how I fix it.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Adam / APP Team		#2 Posted : Monday, March 9, 2009 7:55:06 AM(UTC)
Rank: Administration Groups: Administrators Joined: 7/18/2007(UTC) Posts: 214		Dear dmccorkle, If you find the leak coming from the motor/pump assembly part number AP2616850 there are two common places it leaks from. You can either replace the whole assembly or check the impellor seal kit part number AP631386 or the seal part number AP2038837 located near the drain valve.
User Profile View All Posts by User View Thanks

getzmel		#3 Posted : Monday, March 9, 2009 12:21:26 PM(UTC)
Rank: Member Groups: Registered Joined: 3/9/2009(UTC) Posts: 5		how do you separate the drain pump from the motor? please help:confused:
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Monday, March 9, 2009 1:01:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a broken seal inside the pump. There are two ways to fix it. 1. You can buy the impeller & seal kit and repair the old pump (it comes with the installation instructions) or 2. You can replace the whole pump & motor assembly. In both cases the dishwasher has to be removed from the cabinet. Gene.
User Profile View All Posts by User View Thanks

getzmel		#5 Posted : Monday, March 9, 2009 2:22:22 PM(UTC)
Rank: Member Groups: Registered Joined: 3/9/2009(UTC) Posts: 5		i bought impeller seal kit but it doesnt come with installation kit...is there a special trick to disconnect pump housing from motor?whats holding the motor shaft from impeller...
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Monday, March 9, 2009 2:59:16 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Where did you buy it from? Gene.
User Profile View All Posts by User View Thanks

getzmel		#7 Posted : Tuesday, March 10, 2009 8:17:14 AM(UTC)
Rank: Member Groups: Registered Joined: 3/9/2009(UTC) Posts: 5		i bought the kit from APCO (appliance parts co. in las vegas
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Tuesday, March 10, 2009 2:50:55 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The installation instructions must be included in the kit. You have to talk to them about it. Gene.
User Profile View All Posts by User View Thanks

getzmel		#9 Posted : Wednesday, March 11, 2009 9:14:33 AM(UTC)
Rank: Member Groups: Registered Joined: 3/9/2009(UTC) Posts: 5		Thanks Gene
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)