Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Gas dryer not drying
Options
Go to last post Go to first unread
Model: LGR5620KQ1 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
bkcprice1  
#1 Posted : Wednesday, February 25, 2009 1:02:37 PM(UTC)
bkcprice1

Rank: Member

Groups: Registered
Joined: 2/25/2009(UTC)
Posts: 2
Okay here's my problem(s)

First the timer stopped moving in the Auto Dry Cycle, it would just run forever. So I started using the timed Cycle instead.

Then it stopped drying. The heater would only turn on now and then and then only for a short while.
I replaced the Thermal cut off kit, which includes both thermostats.
This didn't help but I did notice that the igniter would turn on and off but the burner didn't light.
So I replaced the Flame Sensor and both Solenoid Coils.

IT WORKED...for one load!

Now the igniter doesn't even turn on. So now what do I do?

By the way I have checked and cleaned out the vent.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Thursday, February 26, 2009 4:47:38 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
There is a thermal fuse in the back of the dryer. Take the back off, and you will see the thermal fuse. It is white in color, and is a 1/2 wide, and an inch and a half long. That would stop the ignitor from coming on. Tom ApplianceEducator.com
Back to top
bkcprice1  
#3 Posted : Thursday, February 26, 2009 7:23:06 AM(UTC)
bkcprice1

Rank: Member

Groups: Registered
Joined: 2/25/2009(UTC)
Posts: 2
Tom,
Thanks, do you know if I can check it with a multimeter and how to see if its okay or is it a either it works or it doesn't type item? Bob
Back to top
kayakcrzy  
#4 Posted : Thursday, February 26, 2009 1:16:23 PM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Yes Bob, take the 2 wires off of the thermal fuse, and of course the dryer is unplug when we do this, and then check the thermal fuse on ohms to see if you get a reading. If no reading it is bad. Tom ApplianceEducator.com
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Maytag MDG8400AWW gas dryer not drying clothes (Dryer Repair)
by tvr4 12/31/2023 2:45:43 PM(UTC)
Whirlpool Gas Dryer Not Drying Clothes correctly (Dryer Repair)
by ts_peach 1/16/2011 10:40:07 AM(UTC)
Kenmore Elite HE3 Gas Dryer not drying (Dryer Repair)
by TKerscher 6/19/2009 5:43:30 PM(UTC)
Maytag gas dryer not drying (Dryer Repair)
by scott805 2/10/2009 9:19:33 PM(UTC)
Gas Dryer not drying during run cycles (Dryer Repair)
by GMP 9/26/2007 7:09:12 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET