Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Anything between mother board and condensor fan?
Options
Go to last post Go to first unread
Model: GSS25JFPAWW Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
pikeslime  
#1 Posted : Saturday, April 2, 2011 12:53:41 PM(UTC)
pikeslime

Rank: Member

Groups: Registered
Joined: 4/2/2011(UTC)
Posts: 4
Condensor fan on my GE will not run. I replaced the DC fan motor and still nothing.
Does anyone know if there is something between the condensor and mother board? I don't have a wiring diagram to check, and i'm nervous to drop $150 on the motherboard.

Any feedback would be greatly appreciated.

Thanks,
Rob
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, April 3, 2011 5:25:48 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="DarkRed"]Does anyone know if there is something between the condensor and mother board[/COLOR]?
Just a couple connectors.

Below is a link that discusses GE and their DC fans.
http://forum.appliancepartspros...or-test-replacement.html

Here is a manual which may be helpful.
31-9072 Arctica Profile GE Side-by-Side Refrigerator Service Manual - ApplianceDigest.com

You will haveto join the site but it is a very good resource for the appliance DIYer.
THIS FORUM IS DEAD!!!!!!!
Back to top
richappy  
#3 Posted : Sunday, April 3, 2011 6:23:33 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
GE has used cheap drivers in the motherboard, best to replace it whenever a load like the evaporator motor fails. Your service sheet is usually behind the encoder, the control box in the fridg section.
Back to top
pikeslime  
#4 Posted : Sunday, April 3, 2011 9:08:51 AM(UTC)
pikeslime

Rank: Member

Groups: Registered
Joined: 4/2/2011(UTC)
Posts: 4
Denman, richappy,
Thanks. I'm not too experienced at this, so your help means a lot. I plan to replace the board tomorrow and that should buy me a few more years.
Thanks again for responding.

Rob
Back to top
pikeslime  
#5 Posted : Tuesday, April 5, 2011 3:27:20 PM(UTC)
pikeslime

Rank: Member

Groups: Registered
Joined: 4/2/2011(UTC)
Posts: 4
Well, we replaced the board and everything seemed to come on. The freezer temp seems perfect. The condensor fan is purring quietly. But the refrigerator side never cooled down. It's about 55 degrees 24 hours after being "fixed".

Any idea what could be wrong since we just plugged it back in and the board seems to be working? Could they have selected the wrong board at the parts shop?

Again, I will be grateful for any suggestions.
Back to top
richappy  
#6 Posted : Wednesday, April 6, 2011 12:44:53 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Make sure the damper door is open in the refrigerator, the evaporator fan is working and there is no ice jam in the air return at the bottom of the fridg.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET