Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Finabin  
#1 Posted : Friday, April 1, 2011 1:29:43 PM(UTC)
Finabin

Rank: Member

Groups: Registered
Joined: 4/1/2011(UTC)
Posts: 1

Our built in whirlpool oven has power but wont heat up. The digital time works and keeps time well. The controls seem to be fine but the oven wont heat up. Don't know if it could be the heating element or something else.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, April 1, 2011 4:43:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If both Bake and Broil do not work then the problem most likely is a bad oven shut down thermal fuse on the back of the oven (#37 on the diagram). You probably used the self clean prior to the oven stopped heating?

- The thermal fuse Part number: AP3885687
diyneedshelp  
#3 Posted : Thursday, April 14, 2011 9:09:15 AM(UTC)
diyneedshelp

Rank: Member

Groups: Registered
Joined: 4/14/2011(UTC)
Posts: 1

I have the same issue. Power failure and codes, do not remember what the codes were.
Fan keeps running, bake element won't glow red but gets hot.
Display does not show prebake or warm up count down like before.
HEAT light on display goes out too quickly where before it would stay on until oven was hot.
Turned breaker on and off.
Took out control board to check ribbon cable.
Display seems to work fine and read other posts but none indicated fan kept running.
Gene  
#4 Posted : Thursday, April 14, 2011 2:43:44 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: diyneedshelp Go to Quoted Post
I have the same issue. Power failure and codes, do not remember what the codes were.
Fan keeps running, bake element won't glow red but gets hot.
Display does not show prebake or warm up count down like before.
HEAT light on display goes out too quickly where before it would stay on until oven was hot.
Turned breaker on and off.
Took out control board to check ribbon cable.
Display seems to work fine and read other posts but none indicated fan kept running.


Sounds like the problem is a bad oven control board.

- The control board Part number: AP3177932
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.