Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replacing drive belt
Options
Go to last post Go to first unread
Model: WHDVH660HBB Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
vsealv  
#1 Posted : Monday, February 28, 2011 12:49:08 PM(UTC)
vsealv

Rank: Member

Groups: Registered
Joined: 2/28/2011(UTC)
Posts: 2
Hello,

First this is a great forum and a great place to order parts. My belt on my GE Adora washer just broke (model WHDVH660HBB) and I have a new one on the way (ordered here). I figured I would do some research now until it arrives. Is there any tips or advice on how to replace the belt? Any tips or past experience is much appreciated.

Thank you,
Tom Green.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Joe / APP Team  
#2 Posted : Tuesday, March 1, 2011 8:03:19 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: vsealv Go to Quoted Post
Hello,

First this is a great forum and a great place to order parts. My belt on my GE Adora washer just broke (model WHDVH660HBB) and I have a new one on the way (ordered here). I figured I would do some research now until it arrives. Is there any tips or advice on how to replace the belt? Any tips or past experience is much appreciated.

Thank you,
Tom Green.



Tom,

This is the part you orderred, correct.

Part number: AP3884128
Part number: AP3884128


The easist way, is to force fit it on,
(it's a really tight fit),

Put and hold the belt on the motor pulley,
(I usually turn the tub pulley clockwise),

Slip the belt on the left side of the pulley as far as possible,
Then slowly turn the tub pulley,until the belt has seated, then turn it a few more times by hand so the new belt centers out on the pulley.

Be cautious, it really hurts if you get your fingers in the way, and pinched.

Sometimes it takes a couple of attempts, so don't get frustrated.

Good Luck,
:) :) :)
Back to top
vsealv  
#3 Posted : Wednesday, March 2, 2011 10:30:07 AM(UTC)
vsealv

Rank: Member

Groups: Registered
Joined: 2/28/2011(UTC)
Posts: 2
After about 15 minutes I was able to successfully install the belt. It took me some time (head scratching) trying to understand exactly how the belt would fit. From looking at it you would think it wasn't possible, but like you said with a little work and without getting frustrated it slips on. What worked for me is what you said and now my washer is up and running again. Saved me some serious $$ and the work wasn't too bad. This forum and your service was exceptional. Thanks to all.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Frigidaire Washer Won't Spin after replacing drive belt (Washer Repair)
by Shindigit 5/4/2013 10:54:15 AM(UTC)
Replacing drive belt on pulley on gas dryer (Dryer Repair)
by Captain5 4/7/2011 4:17:46 PM(UTC)
replacing drive belt (Dryer Repair)
by drsalmon 10/14/2010 1:06:48 PM(UTC)
replacing drive belt (Washer Repair)
by lfarris 5/18/2008 8:15:09 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET