jenn air microwave only some keys on panel work - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

jenn air microwave only some keys on panel work Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JMV 8000ADW	Brand: Jenn-Air	Age: 5 - 10 years
Previous Topic Next Topic

mea		#1 Posted : Friday, February 18, 2011 5:59:36 AM(UTC)
Rank: Member Groups: Registered Joined: 2/18/2011(UTC) Posts: 8		Microwave heats fine. Some of the keys on the panel do not work. Timer works, fan starts but cannot shut off, and one minute works fine. I can reset the clock depending on what time it is, since half of the numbers do not work. Figure I need to replace the part directly behind the key board. Any suggestions, directions, part numbers. Thank you.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Jeff / APP Team		#2 Posted : Friday, February 18, 2011 12:38:00 PM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		You have a bad touch pad. Here is your part number. Hope this helps. Part number: AP4060319 Control panel replacement parts for JENN-AIR JMV8000ADW MWAVE- MOUNTED UNDER CABINET \| AppliancePartsPros.com


User Profile View All Posts by User View Thanks

mea		#3 Posted : Saturday, February 19, 2011 4:53:04 AM(UTC)
Rank: Member Groups: Registered Joined: 2/18/2011(UTC) Posts: 8		Thank you for the fast response. Do you know if the parts come with any instructions? I plan to do this myself.


User Profile View All Posts by User View Thanks

Jeff / APP Team		#4 Posted : Monday, February 21, 2011 4:06:02 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 2/14/2011(UTC) Posts: 816		Don't think they will. This repair is not to bad to do. Unplug unit. When you get the new part in, remove the vent cover on the top. Then you will see the screw for the control panel. Remove the screw and lift off the panel. Once removed you will disconnect the ribbon cable. Then remove the control board from the back and install on the new panel. Then reinstall in reverse order. Hope this helps.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close