Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 4
|
As soon as I push START it pop very loud, way louder than popcorn, but the same type of sound pattern.
Any ideas where to start?
This is an over the range unit.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: unregistered  As soon as I push START it pop very loud, way louder than popcorn, but the same type of sound pattern.
Any ideas where to start?
This is an over the range unit. You have to have an ohmmeter to perform the troubleshooting. Let us know when you ready. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 4
|
I found my owners manual/paperwork and found no mention of a ten year warranty for the magnetron.:mad:
There is quite a bit of activity in the kitchen today so, I will not be allowed to work on this for now. This is an over the range(ceramic) so I think I will be moving the range out of the way first thing. I have several gages. Cheap radio shack to much more expensive Fieldpiece HVAC gage that checks MFD for run and start capacitors. I noticed there is another thread on this page or the next with some specifics on magnetron testing(I believe it was a GE unit). Would I be correct in assuming the test procedure would be the same with this Whirlpool?
Thanks for your replies.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/7/2011(UTC)
Posts: 1
|
I had the same thing happen to me. It sound like a piece of glass breaking. It was very loud. Now when I use it has a loud hum and doesn't heat right.
The guy that responded earlier was on the right track about them having a 10 year warranty. Mine is a Frigidaire. I called them and they said it did indeed have a 10 year warranty on it.
But for them to honor the warranty you'll have to have a Factory authorized Service center do the work. I got a guy to come out and fix mine for 75 bucks.
So either way they got yeah, either pay for the magnetron or pay for the service but you'll still have to pay eather way.
If you have the receipt you may be able to bring it back to the store you bought it from if it does repairs, and they may cover the repair cost (labor) as well as the magnetron. I know Sears does. Good luck
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Originally Posted by: unregistered ...Would I be correct in assuming the test procedure would be the same with this Whirlpool?... Yes, it is pretty similar. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 4
|
I fixed this Saturday, finally. Around $48 shiped from Appliance Parts Pros. It was a lot of work. The magnetron is in the upper right hand corner. Getting to it involves taking the unit down. Taking the bottom cover. back cover, then the sides/top(one piece) off. Not the easiest appliance repair I have ever done.$48 beats $250 for a new one. The really ship fast. Must have an arrangement with FedEx.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
I'm glad you were able to fix it. Good job!
Thank you for the feed back.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/2/2011(UTC)
Posts: 4
|
We had company over and the wife stated that I FINALLY fixed the microwave. My buddy said "what was wrong with it". I told him it was the magnetron and what a pain in the butt it was to fix.
He said "how did you figure out what was wrong" I said Appliancepartspros.com.
Thanks for keeping this board up.
|
|
|
|
|
|
Rank:: Administration
Groups: Administrators
Joined: 7/18/2007(UTC)
Posts: 214
|
Originally Posted by: unregistered We had company over and the wife stated that I FINALLY fixed the microwave. My buddy said "what was wrong with it". I told him it was the magnetron and what a pain in the butt it was to fix.
He said "how did you figure out what was wrong" I said Appliancepartspros.com.
Thanks for keeping this board up. Its always nice to hear when someone has been successful in such a difficult repair. Many thanks goes to the volunteer technicians on the forum and the AppliancePartsPros.com staff. Without them a successful forum would not be possible. We are always looking to improve so thanks for taking the time in giving the positive feedback. We will be here if you need any assistance in the future. Thank you for choosing AppliancePartsPros.com.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
