Broken drive gear - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Broken drive gear Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GX900QPPB2	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

Ed Maher		#1 Posted : Friday, December 10, 2010 9:32:47 AM(UTC)
Rank: Member Groups: Registered Joined: 12/10/2010(UTC) Posts: 2		:eek: Found broken drive gear. What caused it? I would press Start it would start to compress and then make noice. I had to press OFF ,then, ON, to retract ram?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Ed Maher		#2 Posted : Friday, December 10, 2010 9:56:33 AM(UTC)
Rank: Member Groups: Registered Joined: 12/10/2010(UTC) Posts: 2		:confused: Originally Posted by: Ed Maher :eek: Found broken drive gear. What caused it? I would press Start it would start to compress and then make noice. I had to press OFF ,then, ON, to retract ram?


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Friday, December 10, 2010 1:09:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Very likely the problem is a broken power nuts (#12 on the diagram). Also the power screws (#2) have to be lubricated. You have to remove the ram assembly to access the power nuts. When replacing the ram assembly in the compactor, tape the switch arm of the top limit/directional switch. This will prevent damage to the switch arm as the ram is reinstalled. Remove the tape after the ram is in place. The chain has to be adjusted after you replaced the drive gear. It should be 3/8" (9.5mm) to 1/2" (12.7mm) deflection between any 2 sprockets. - The power nut kit (2 needed) Part number: AP2984036 - The drive gear kit Part number: AP3122987 - The grease Part number: AP3134980 Here are the breakdown diagrams and Replacement parts for WHIRLPOOL GX900QPPB2 TRASH COMPACTOR \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

WhirlpoolSucks		#4 Posted : Thursday, January 6, 2011 6:30:53 AM(UTC)
Rank: Member Groups: Registered Joined: 1/6/2011(UTC) Posts: 1		The key reason that the "Driven Gear" breaks is poor design. There is nothing to contains the expansion forces that are applied to the inner hub of this gear by the interface to the hex connection to the drive sprocket. If you regularly use this as a compactor - by that I mean you hear the motor loading because it is really doing some work - then this gear will last about a long as a snowball in hell. The other components may be fine.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close