Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Auzzie  
#1 Posted : Monday, October 4, 2010 10:29:14 AM(UTC)
Auzzie

Rank: Member

Groups: Registered
Joined: 10/4/2010(UTC)
Posts: 2

One half of the upper element has failed and the oven will not self-clean either anymore. I have researched your WEB site for the part number and concluded the element most correct is part number AP4283355. The drawing shows the terminal ends with holes. With the power off, when I remove the brackets holding the elements in place and pull forward, how should I find these terminal ends connected. Other blogs I have read about crimped ends, is that what should be on these wires, a female crimp to slide on to the new element?
Thanks in advance.

Additionally - the oven's S/N 10C311087852
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted : Monday, October 4, 2010 11:02:00 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Auzzie Go to Quoted Post
One half of the upper element has failed and the oven will not self-clean either anymore. I have researched your WEB site for the part number and concluded the element most correct is part number AP4283355. The drawing shows the terminal ends with holes. With the power off, when I remove the brackets holding the elements in place and pull forward, how should I find these terminal ends connected. Other blogs I have read about crimped ends, is that what should be on these wires, a female crimp to slide on to the new element?
Thanks in advance.

Additionally - the oven's S/N 10C311087852


Auzzie,

Yes,

You are correct, on both the part number and the terminal connections.

Part number: AP4283355
Part number: AP4283355



Just remember to turn off power to the range first, and take your time and be careful, in some, but not all cases, you may have to carefully bend the terminals to a 90 dgr in order to eliminate the possibility of a short to the cabinet(these appear to be pre formed, so I don't see a problem) .



Good Luck,
:cool: :cool: :cool:
Auzzie  
#3 Posted : Monday, October 4, 2010 12:11:05 PM(UTC)
Auzzie

Rank: Member

Groups: Registered
Joined: 10/4/2010(UTC)
Posts: 2

Thank you for your quick and detailed response. We will order the part now. Cheers
Joe / APP Team  
#4 Posted : Monday, October 4, 2010 1:31:11 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Auzzie Go to Quoted Post
Thank you for your quick and detailed response. We will order the part now. Cheers


You're welcome.

Good Luck,
:cool: :cool: :cool:
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.