Dryer won't start. Buzzes loudly when start pressed. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Dryer won't start. Buzzes loudly when start pressed. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.86984100	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

Spoiler9112		#1 Posted : Saturday, September 4, 2010 1:48:30 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2010(UTC) Posts: 1		Hello all. This is a 20 year old dryer. This issue has occured before, but the dryer would start normally if I tried again after about an hour. No luck this time, plus a slight burn smell. Any suggestions appreciated!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Thursday, September 9, 2010 5:19:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for KENMORE 11086984100 \| AppliancePartsPros.com Sounds like the motor is shot. Try turning the drum by hand. Should turn fairly easily. If not could be the drum is jammed for some reason. You may want to try this on a couple other dryers to get a feel for it. If it is difficult to turn run your fingers around the back and front of the tub to machine seal. To see if something has jammed between the tub and frame (bra wires are famous for this). Be careful in case the object is something sharp. If nothing is jammed in there you will have to open it up and find the cause. If it rotates OK. This may take 2 people Open the door Manually hold the door switch closed Push the start button and manually rotate the drum in the correct direction. Watch your knuckles in case it starts up. If it does start up, odds are high that you need a new motor. Could also be that the motor is jammed solid with lint and this is preventing the Start/Run centrifugal switch from resetting (the unit is trying to start with out the motor's start winding in circuit.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close