Whirlpool wtw500dw1 won't fill - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool wtw500dw1 won't fill - Washer starts to fill with water but won't fill completely Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

Guest		#1 Posted : Sunday, June 9, 2024 4:14:40 PM(UTC)
Rank: Guest Groups: Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		Hi. Never had this issue. Washer works in ever other way, but when you start a load and it is on the 'sensing' step it begins filling with water but only fiils for about 10 seconds then begins the selected wash cycle. If I open the lid and close it begins again for 10 seconds then begins load. Can't find anything about it online. What is happening? What is the fix? I am generally good at fixing things.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

WilliamM/APP Team		#2 Posted : Tuesday, June 11, 2024 7:00:31 AM(UTC)
Rank: Member Groups: Moderators, APP Team, Registered Joined: 2/27/2024(UTC) Posts: 0 Location: TN Was thanked: 14 time(s) in 14 post(s)		Thank you for your question. If the pressure hose is clean where it plugs into the tub port, and the port is clear, the failure would be in the main control. https://www.appliancepar...w11116590-ap6261032.html


User Profile View All Posts by User View Thanks

Guest		#3 Posted : Thursday, June 13, 2024 4:27:11 AM(UTC)
Rank: Guest Groups: Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		If you can access the small hose at the back of the tub while the machine is filling with water try either blowing into it or sucking on it at the end going to the control panel. You will probably need an extra piece of hose and a connector of some sort to be able to do it . Also try to blow and suck on it with the power off and listen for a click of the device. As the washer puts water into the tub it produces a slight positive pressure in the hose to turn the control for water supply on and off.muUq64uu


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close