Maytag MVW7232HW0 Will Not Complete a Cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Maytag MVW7232HW0 Will Not Complete a Cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

JNN1988		#1 Posted : Wednesday, February 7, 2024 8:29:57 AM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2024(UTC) Posts: 0 Location: South Carolina		Brand: Maytag Model Number: MVW7232HW0 I have a 2-year-old Maytag MVW7232HW0 that recently stopped putting out water. This issue required a Main Control Board, a new Slider, and Reset Procedure. Now every cycle goes like clockwork until it gets to the final spin, leaving anywhere from 12 - 21 minutes (depending on cycle) with a slow spin, lasting indefinitely. I can cancel the cycle and use Drain & with a fast spin for a temporary bypass, but even this cycle will get to 17 minutes and spin indefinitely. No Errors. What now? Any help is greatly appreciated.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

JNN1988		#2 Posted : Thursday, February 8, 2024 3:24:06 AM(UTC)
Rank: Member Groups: Registered Joined: 2/7/2024(UTC) Posts: 0 Location: South Carolina		FIXED: I managed to fix the issue with my machine. If you have a "Smart Wahser," you might try this. I reconnected the washer to the WIFI and updated the software. Ran a load on Delicate, and the cycle completed as it should. I then ran a moderately sized load on Regular, and the cycle completed as it should. Originally Posted by: JNN1988 Brand: Maytag Model Number: MVW7232HW0 I have a 2-year-old Maytag MVW7232HW0 that recently stopped putting out water. This issue required a Main Control Board, a new Slider, and Reset Procedure. Now every cycle goes like clockwork until it gets to the final spin, leaving anywhere from 12 - 21 minutes (depending on cycle) with a slow spin, lasting indefinitely. I can cancel the cycle and use Drain & with a fast spin for a temporary bypass, but even this cycle will get to 17 minutes and spin indefinitely. No Errors. What now? Any help is greatly appreciated.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close