Whirlpool 3968298 Kit is no longer available but I was able to buy a new one from Ebay. It included 2 wire harness to upgrade the old control board to the new one. However the water level pressure switch on machine has the typical 3 wires which are soldered to the old board; however the new control board has two male spades for which to connect the pressure switch. The new kit has some instructions on how to remove old one and install new one but has no reference or wire schematic on making the connection. Any help is appreciated.

Edited by user Wednesday, November 4, 2020 8:39:26 PM(UTC)  | Reason: Not specified