Tub fills, but doesn't start and loud buzz - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Tub fills, but doesn't start and loud buzz Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLET1031CSO	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

GodSmackedMe		#1 Posted : Sunday, September 15, 2013 11:16:17 PM(UTC)
Rank: Member Groups: Registered Joined: 9/15/2013(UTC) Posts: 1		Washer/dryer combo and the washer is apparently dead. Like the title says, it will fill the tub, but wont do anything else except for a loud buzz/hum. I took off the front panel hoping it was just a belt (still in place), or to see if I could locate where the sound was coming from, but it echoes throughout the metal of the whole thing so I cannot pinpoint where the sound is coming from. I can spin the tub in one direction by hand, but not the other direction. Any suggestions on where I should start? Thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

iblashaun!		#2 Posted : Sunday, April 14, 2019 3:35:42 PM(UTC)
Rank: Member Groups: Registered Joined: 11/2/2018(UTC) Posts: 0 Location: missouri		i had a Frigidaire(a lot of these same parts) did same thing everyone tried saling me whole trans. turned out down by trans.there is a bearing bought from e bay under 1500 fixed my problem. Sure beat the over 200.00 for new trans. hope this helps


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close