Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Busch58  
#1 Posted : Wednesday, January 10, 2018 1:09:35 PM(UTC)
Busch58

Rank: Member

Groups: Registered
Joined: 1/10/2018(UTC)
Posts: 3

Power surge pooched the logic board, part number or partial number since the sticker was roasted a bit. #2727040 Question. Can anyone identify this by visual and or can anyone advise of a good interchange listing? Can anyone advise if these boards are worth repairing? This unit MFG. March 2002 The black thing in the photo is NOT part of the assembly.
Busch58 attached the following image(s):
IMG_4135.jpg
IMG_4136.jpg
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Wednesday, January 10, 2018 1:42:06 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
My opinion, its 15 years old, it outlived most of its kind by 5 years. I would give it a nice funeral at the dump.

But if you are serious at fixing it, I found a board at $ears. Part number 22004317. About $164.

I wouldn't do it, but its up to you.
Busch58  
#3 Posted : Wednesday, January 10, 2018 2:02:22 PM(UTC)
Busch58

Rank: Member

Groups: Registered
Joined: 1/10/2018(UTC)
Posts: 3

Thanks for the quick reponse ! No argument from me....this is an old beast but was working perfectly until the power surge. I'll check the part # you advised and thanks again
Busch58  
#4 Posted : Thursday, January 11, 2018 11:48:54 AM(UTC)
Busch58

Rank: Member

Groups: Registered
Joined: 1/10/2018(UTC)
Posts: 3

the story ends here.....should have done the obvious first...sorry about that
Busch58 attached the following image(s):
IMG_4144.jpg
IMG_4146.jpg
ThatGuy  
#5 Posted : Thursday, January 11, 2018 1:41:50 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
That's a burnt trace and of course the power resistor is almost burnt off the board. This kind of thing can be repaired, but the problem is something caused this. A shorted board or maybe a shorted motor. Either is bad news and more money spent on a 15 year old washer. Its just not cost effect, too many other things can still go wrong.

Your pictures were very helpful.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.