Inglis Washer - Buzzing, but not spinning/agitating - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Inglis Washer - Buzzing, but not spinning/agitating Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ITW4300SQ0	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

fsuedonkey		#1 Posted : Thursday, October 19, 2017 2:32:58 PM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2015(UTC) Posts: 9		This weekend I went down and found a full load of laundry on spin cycle just buzzing but not moving. I stopped the cycle and then restarted. It finished the load no problems. Yesterday the same thing happened but it didn't restart. I tried to agitate and it would work intermittently and finally got it to go into spin mode. Now this morning I am just getting the buzzing noise from the top of the unit and it will not spin or agitate. I am guessing the lid switch is fine because when I open and close the buzzing starts and stops. Wasn't sure where to go from here if it was the timer, control board, motor.... don't know a lot about these repairs, but this forum has helped me troubleshoot before so I figured it was the place to go. Thanks for any help you can offer. -Ian


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

fsuedonkey		#2 Posted : Thursday, October 19, 2017 3:23:07 PM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2015(UTC) Posts: 9		Ok so I just plugged the sucker back in and tried to spin, it acted like it wanted to. I then tried to agitate and did the same. I went back and forth a couple of times and it started on spin cycle...... Now I'm really confused. I suppose now that it's completely drained I am going to leave it be until I figure out what to do next.


User Profile View All Posts by User View Thanks

brobriffin		#3 Posted : Saturday, October 21, 2017 11:53:43 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Question did it drain all of the water out without actually spinning? If so your coupling is likely broken. It is like a universal joint, it connects the motor to the transmission. See part #13 on the schematic Parts for Whirlpool ITW4300SQ0: Brake, Clutch, Gearcase, Motor and Pump Parts - AppliancePartsPros.com that part also has a repair video. If the coupling is good and the motor isn't working you may have a bad capacitor. See part 29 on this schematic. Parts for Whirlpool ITW4300SQ0: Controls and Rear Panel Parts - AppliancePartsPros.com
		WWW

User Profile View All Posts by User View Thanks

fsuedonkey		#4 Posted : Saturday, October 21, 2017 11:56:26 AM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2015(UTC) Posts: 9		It did not drain the water initially but once i got it spinning it did. Its back to not spinning or agitating. Only the buzzing noise.


User Profile View All Posts by User View Thanks

fsuedonkey		#5 Posted : Sunday, October 22, 2017 6:26:37 AM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2015(UTC) Posts: 9		Took it apart. Coupling is in perfect shape. Took the capacitor out. Is there any way of testing it to know if it is the problem or should I just replace it and see if it fixes the problem?


User Profile View All Posts by User View Thanks

brobriffin		#6 Posted : Monday, October 23, 2017 6:04:54 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		You can test the capacitor if you have a multimeter that can test for capacitance. That is measured in microfarads. If not just try replacing it. As it sounds like that is your problem.
		WWW

User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close