Kenmore 100 banging during spin cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore 100 banging during spin cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 100.20022011	Brand: Kenmore	Age: Less than 1 year
Previous Topic Next Topic

okilmer		#1 Posted : Sunday, July 3, 2016 7:14:44 PM(UTC)
Rank: Member Groups: Registered Joined: 7/3/2016(UTC) Posts: 2		I have a Kenmore 100.20022011 that is banging around when it starts spinning at the end of the wash cycle. It becomes unbalanced and the tub begins to bang around against the outside of the machine violently for anywhere between 5-20 seconds. At that point it seems to work itself out and finishes the rest of the cycle without any issues. I have checked the suspension rods, springs, and ball joints. All of these seem to be in working order. Is it possible for these to need replacement without anything visibly wrong? What else could be causing this issue? Thanks for your input. [EDIT] This washer is actually about 5 years old.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Monday, July 4, 2016 7:31:17 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Your model number should read 110.20022011 which is manufactured by Whirlpool. I suspect it is your support rods (springs) are bad. Try the bounce test. With the tub completely empty, open the lid push down on one corner of the tub. Release and see if the tub bounces. Try all four corners. If any bounce at all (the tub should spring back up and stop) then replace the springs (support rods) which can be found @ Whirlpool W10780048 Suspension - AppliancePartsPros.com
		WWW

User Profile View All Posts by User View Thanks

okilmer		#3 Posted : Monday, July 18, 2016 5:18:54 AM(UTC)
Rank: Member Groups: Registered Joined: 7/3/2016(UTC) Posts: 2		This worked! Thanks for the help!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close