Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Blower wheel repair
Options
Go to last post Go to first unread
Model: LNC7761A-71 Brand: Admiral Age: More than 10 years
Previous Topic Next Topic
mrflv2bwl  
#1 Posted : Tuesday, March 22, 2016 12:24:42 PM(UTC)
mrflv2bwl

Rank: Member

Groups: Registered
Joined: 12/5/2011(UTC)
Posts: 5
Need to replace blower wheel again. Ordered part today. Thought I'd get a head start and remove old wheel. Removed retaining clip and ring. Wheel will not come off. Yes I aligned the 1/2 circle. Still won't budge. How can I remove the old wheel.

Thanks,

Mike
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
thorning  
#2 Posted : Wednesday, March 23, 2016 12:55:45 PM(UTC)
thorning

Rank: Member

Groups: Registered
Joined: 8/25/2012(UTC)
Posts: 248
Some of these plastic blower wheels are seized on to the shaft due to moisture getting into the shaft area. If the blower wheel is scrap anyhow you may have to pull hard on the edges of the wheel to get it off. Sometimes they break apart at the hub area . Most of the ones I have taken apart are damaged in the hub. You mention this is a repeat replacement. Did the previous one have a damaged hub ? I find some of the new blower wheels are not very uniform and as they rotate they wobble a little. I always make sure they are not rubbing around the edge inside the blower housing .
Back to top
Users browsing this topic
Similar Topics
blower wheel repair (Dryer Repair)
by mrflv2bwl 1/16/2012 1:12:55 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET