Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool washer drains but doesn't spin
Options
Go to last post Go to first unread
Model: LXR9445JQ0 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
Badgerbob  
#1 Posted : Friday, June 5, 2015 2:48:33 PM(UTC)
Badgerbob

Rank: Member

Groups: Registered
Joined: 3/8/2015(UTC)
Posts: 3
My Whirlpool washer drains but won't spin. I replaced the Sub-coupler a year ago and just replaced the Clutch ass'y and installed a Cam agitator kit. It is not the lid switch & I can hear the motor running. HELP!!!

Thanx,
Badgerbob
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Friday, June 5, 2015 5:34:08 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Right, since the machine is draining the motor is working and the coupling is fine.

So check to see if the clutch housing is spinning during the spin cycle. If not, the transmission is likely at fault. If so, and you replace the clutch lining and brake cam correctly the drive block may be an issue.
Back to top
Badgerbob  
#3 Posted : Saturday, June 6, 2015 5:47:18 AM(UTC)
Badgerbob

Rank: Member

Groups: Registered
Joined: 3/8/2015(UTC)
Posts: 3
Thanx. I ordered a Drive block & will try that, as it seemed like it was spinning loudly & banging around, before it went to heck.
Badgerbob
Back to top
sidfink43  
#4 Posted : Saturday, June 6, 2015 9:44:35 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Ok good, let us know how things turn out
Back to top
Badgerbob  
#5 Posted : Saturday, June 13, 2015 5:09:31 PM(UTC)
Badgerbob

Rank: Member

Groups: Registered
Joined: 3/8/2015(UTC)
Posts: 3
I'm trying to replace the Drive Block, but I can't get the inner basket to come out, after I removed the nut. I've tried cleaning out around it, but it is stuck on there. Any ideas?

Thanx,
Badgerbob
Back to top
sidfink43  
#6 Posted : Saturday, June 13, 2015 5:55:04 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
It should just lift out, see this video. I assume by nut you mean the nut that holds the basket on.

https://www.youtube.com/watch?v=w4O3n3r91B4

but if it is all gunked up that may be a problem. Can only suggest you work it carefully and see if you can get it out without breaking anything.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET